A broken crankshaft on a Continental Gasoline fueled truck engine from the 1940s and 50s would begin knocking like a failed connecting rod and continue to run for about 20 to 40 minutes. (great for a fire truck)
A Chrysler built 2.2 the easy diag is that the timing belt is intact but does not move when rolling the engine over on the starter.
Most engines will have little or no compression and resistance to the starter turning the engine, on closer examination it will be found the camshafts are not turning. After removing the oil pan it will be obvious.
The crank sensor on a 2001 Malibu is located on the bottom of the engine near the crank shaft. It monitors the rotation and speed of the crank shaft.
well a cranks shaft u need a hand to pump its the same as petrol because when u pump it A WIERD SUBSTANCES EJACULATES FROM IT :)
you get a gun and you shot it till its removed
use impact gun
The window crank will most likely be held on one of two ways. There could be a screw in the middle, or there is a clip behind it holding the shaft.
One thing is for sure, it wouldn't run.
How do I know if a shaft is bad on a Ford
One symptom of a bad crank shaft sensor is the car having trouble starting. The car stalling and backfiring are other symptoms of a bad crank shaft sensor.
I would recommend that you do put a crank shaft head on a crank shaft. Putting any other type of head on a crank shaft could possibly break the head.
Crank shaft
Need to know what size engine it has.
Take It Off Amd Inspect It.
The engine crank shaft is inside the engine
The crank sensor on a 2001 Malibu is located on the bottom of the engine near the crank shaft. It monitors the rotation and speed of the crank shaft.
Where is the crank shaft sensor located in a Audi a6
400 has a longer stroke
2 types of crank shaft are there 1.same plane 2.cross plane crank shaft in cross plane crank shaft cranks are inclined at 90 degree and in same plane crank shaft cranks are in same plane. thnk u