well a cranks shaft u need a hand to pump its the same as petrol because when u pump it A WIERD SUBSTANCES EJACULATES FROM IT :)
The crank sensor on a 2001 Malibu is located on the bottom of the engine near the crank shaft. It monitors the rotation and speed of the crank shaft.
98 chevy s10
you get a gun and you shot it till its removed
Remove 2 small u-bolts from rear end yoke Pry drive shaft out of yoke Slide front end of drive shaft off front splines
where is the driveshaft on a 2005 Ford Ranger
On Drive side It's On the bellhousing
I would recommend that you do put a crank shaft head on a crank shaft. Putting any other type of head on a crank shaft could possibly break the head.
It won't.
its behind the OS drive shaft (gearbox side)
AnswerCheck the crank pully bolt. If it has come loose you will have a leak.The crank pully bolt does not have anything to do with the crank shaft seal leak. Thebolt is independent of the seal. To replace seal remove crank shaft pully and you will have access to crank shaft seal, pull out & replace seal.
Crank shaft
The crank sensor on the Vauxhall Astra is above the offside drive shaft. It is best viewed by looking under the car.
The engine crank shaft is inside the engine
The crank sensor on a 2001 Malibu is located on the bottom of the engine near the crank shaft. It monitors the rotation and speed of the crank shaft.
Where is the crank shaft sensor located in a Audi a6
400 has a longer stroke
2 types of crank shaft are there 1.same plane 2.cross plane crank shaft in cross plane crank shaft cranks are inclined at 90 degree and in same plane crank shaft cranks are in same plane. thnk u