Normally on a digital small camera like the Nikon Coolpix S220 there is a power button and by that power button should be a small light, once plugged in the light should switch on and go red or green (sometimes yellow, amber or blue its depends on the company)
If there is no light anyway that indicates anything then i suggest to search the brand and type of camera it is online or it might say something about the charging light in the manual...
Hope this helps!
Its probably broken or might need a new battery in it...
Provides information concerning the state of charge to the display circuit. Feedback during charging to prevent overcharging.Information terminal.
Likely has either bad battery, or bad USB charging cable. Check support.samsung.com for more info.
he did but no as we know it it was a pin hole camera look it up
Maybe your battery is dead or needs charging. Get out your instruction manual and figure out what's wrong. If it is your battery, make sure you read the instructions on the right way to change the battery, because if you don't do it right, you may lose all your pictures and stuff on the camera. Also, if you still need help, type in the full name of your camera (it should be on the front of your camera) into an internet search engine. This should lead you to more information.
To charge a camera battery with USB, you can typically connect the camera to a USB power source using a USB cable. Make sure the camera is turned off while charging. The battery should start charging once connected, and you can check the battery indicator on the camera to monitor the charging progress.
Yes, the SterlingTek's Premium Fuji 5V Digital Camera Charger plugs right into the camera for charging and also adapts to fit any kind of socket worldwide.
The best way to charge your Arlo outdoor camera using the Arlo outdoor charging cable is to connect the cable to a power source, such as a wall outlet or a power bank, and then plug the other end of the cable into the camera's charging port. Make sure the camera is turned off while charging to ensure a full and efficient charge.
To charge an Arlo Essential Spotlight camera, you can do the following: Remove the camera from its mount. Bring the camera inside. Open the flap at the bottom of the camera to reveal the USB charging port. Plug the USB charging cable into the camera. Plug the USB cable into a USB port or a plug. The Arlo Essential Spotlight camera has a built-in rechargeable battery. The battery can't be removed from the camera. The camera can be charged indoors with the included micro USB charging cable. It can also be charged outdoors with a VMA3600 Solar Panel.
The best way to charge your GoPro camera using a USB wall charger is to connect the USB cable from the charger to the camera's charging port, then plug the charger into a wall outlet. Make sure the camera is turned off while charging to ensure a faster and more efficient charging process.
One can not charge a Canon camera on the computer. The only way to charge a Canon camera is by using the devices intended for charging. Unfortunately Canon cameras do not support computer charging.
To charge the Kodak Easyshare V1233, you need to connect it to a power source using the included USB cable and a compatible adapter or computer. Make sure the camera is powered off during charging. The charging indicator light on the camera should turn on to show that it is charging.
well on some cameras the screen is just blank (black) but if you turn it on while plucked in (in computer, laptop only) it will still charge and u can also edit, rename and other stuff while charging (i could be wrong but that's what happens with my vivicam vivitar camera and I'm only 11) good luck XOxOX
unless you are trying to make yourself look stupid by charging your camera with your xbox you don't.
You HAVE to turn it off when charging, so yeah, you can :)
Kodak's Easyshare system makes the whole system (camera, charging, and printing) work together seamlessly.
To charge an HP Photosmart camera, first ensure you have the correct charger or USB cable compatible with your camera model. Connect the camera to a power source using the charger or plug the USB cable into a computer. The camera should display a charging indicator, and it typically takes a few hours to fully charge. Always refer to the user manual for specific charging instructions related to your model.