Learn machine language.
(Or at least assembler.)
Could be the problem your having is not computer related.
You need to have a diagnostic meter to read the codes, then book to tell you what they mean.
disconect reconect computer should reset
They make about 630,000
The Montana not shifting into overdrive could be caused by several things. First, check the computer codes for any possible problems. Make sure that the transmission fluid is full and does not look or smell burnt. If the vehicle has high mileage, the transmission filter could need changing.
yes thare is but you have to make your own code if you dont have a computer or if you do have a computer you can just serch for codes on the internet Manualy
I will try to answer this. If you mean codes in the on board computer, it takes 100 miles of driving to make the computer readable if the battery has been disconnected for some time or the error codes have been erased from the ECU (computer).
you have to go on to a library computer and make shure its not blocked then do that thereor.....=unblock the program=
Yes, the computer does store its codes in the RAM.
I need to know the computer fault codes I need numbered bios codes and not bleep codes
The RAM is where the computer stores all the required codes to run it.
Use AR codes to unlock CPU duel in World Championship mode.
P0700 is set in the engine computer when the transmission computer has also set codes. You need to know the codes in the transmission computer to know possible causes and cost.P0700 is set in the engine computer when the transmission computer has also set codes. You need to know the codes in the transmission computer to know possible causes and cost.
computer password code
you cannot jump the computer terminals on a vehicle with the OBD2 computer unlike the original OBD. you must check codes with a computer tester. very cheap at autozone--bought mine for $25.00.
Yes, P0700 is a code in the engine computer that tells you to check the trans computer for codes. You check those codes and repair them and P0700 will go away.Yes, P0700 is a code in the engine computer that tells you to check the trans computer for codes. You check those codes and repair them and P0700 will go away.
I you pulled a P0700 out of the engine computer it means that you need to check the transmission computer (tcm) for codes also.I you pulled a P0700 out of the engine computer it means that you need to check the transmission computer (tcm) for codes also.