0
In addition to the answer below, it is important to know if the moldings are interior or exterior. If they are interior, most of them can be removed (carefully) so they're easier to work on and any paint that drools onto other side can be removed. Exterior moldings are usually stationary and should be done by a professional who has the equipment to reach 2nd floors, knows what paints, stains, glazes,etc. to use, and is then responsible for anything that may go wrong,i.e. adhesion, color, technique. You may want to contact the manufacturer of the moldings to find out what they recommend. They're usually good about that. Scuff lightly with a high grit sand paper (800-1200 grit) clean with warm soapy water, plastic is petroluem based so a good dish soap will wash away the oils inherent on the molding. A good latex exterior grade paint will work fine. paint using your technique an let dry per specifications of paint you chose
What else can I help you with?
What type of paint should be used to paint molding?
You can use either water or oil based paint, which are both available in a variety of sheens to paint molding. Water based satin coatings are very popular for crown molding in 2012 and have been for several years, while an oil based semi-gloss are the best choice for baseboards and door moldings where available.
Why do we paint wooden doors and Windows?
Why do we paint wooden doors and Windows
How can you paint without touching the molding or ceiling?
To paint without touching the molding or ceiling, use painter's tape to create clean edges. Apply the tape carefully along the line where the wall meets the molding or ceiling, ensuring a tight seal to prevent paint bleed. You can also use a paint edger or a small brush for precision, allowing you to paint right up to the edge without making contact. Lastly, work slowly and methodically to maintain control and achieve a professional finish.
How do you paint plastic lego models?
A hobby shop will have small pots of paint for painting on plastic or try artists acrylic paint.
Which is better luster paint or plastic paint?
depends on what you are going to paint
Where you can get the plastic molding for a 71 Westfalia Camper Van not the T molding stuff the stuff that goes around the doors in the cabinets?
there is no such manufacturer. it is a "junkyard" part. or you can clean your OG trim and Paint it...
What is a decorative material?
A decorative material is a substance or object used to enhance the visual appeal of a space or item. Examples include wallpaper, paint, fabric, tiles, and decorative finishes like molding or trim. These materials are chosen for their aesthetic qualities and ability to complement a design scheme.
What are some tips for installing crown molding before and after painting a room?
Before painting a room with crown molding, it is recommended to install the molding first. This helps to avoid getting paint on the molding and ensures a clean finish. After installing the crown molding, you can then paint the room, being careful to tape off the edges of the molding to prevent any paint from getting on it. This will result in a professional-looking finish to your room.
How can I effectively remove paint from molding?
To effectively remove paint from molding, you can use a chemical paint stripper or a heat gun to soften the paint, then scrape it off with a putty knife or a scraper tool. Be sure to wear protective gear and work in a well-ventilated area. Sand the molding after removing the paint to smooth out any remaining residue.
How can I effectively use frosted spray paint for windows to enhance privacy and aesthetics in my home?
To effectively use frosted spray paint for windows to enhance privacy and aesthetics in your home, clean the windows thoroughly, apply the spray paint in even coats, and let it dry completely. You can also use stencils or tape to create patterns for a decorative touch.
What are some creative ways to incorporate fireplace crown molding into a room's design scheme?
One creative way to incorporate fireplace crown molding into a room's design scheme is to paint it a contrasting color to make it stand out. Another idea is to add decorative elements such as rosettes or dentil molding to enhance the overall look. Additionally, you can use the crown molding to create a focal point by framing the fireplace with it and adding lighting to highlight the area.
Can you paint rubbr baseboard molding?
No, it never sticks on.
How can I install cabinet molding?
To install cabinet molding, measure and cut the molding to fit the cabinets, then attach it using a nail gun or adhesive. Sand and paint the molding for a finished look.
How do you remove the outside lower black plastic molding from your 2005 Jeep Grand Cherokee?
To remove the lower black plastic molding from your 2005 Jeep Grand Cherokee, start by using a flathead screwdriver or a trim removal tool to gently pry off any clips or fasteners securing the molding to the body. Be careful to avoid damaging the paint or the molding itself. Once the clips are released, simply pull the molding away from the vehicle, ensuring all fasteners are removed. If necessary, consult your vehicle’s service manual for specific instructions and fastener locations.
Why injection molding is capable of producing parts with complex shapes and fine detail?
it can produce highly detailed parts very rapidly that require little or no finishing
Can paint for crown molding be a latex satin wall and trim paint?
Yes or it can be the same as the wall paint if it should be flat.
What type of paint should be used to paint molding?
You can use either water or oil based paint, which are both available in a variety of sheens to paint molding. Water based satin coatings are very popular for crown molding in 2012 and have been for several years, while an oil based semi-gloss are the best choice for baseboards and door moldings where available.
