0
What else can I help you with?
What are the ingredients for satin paint?
There are different kinds of satin paint - you'd have to know if it was latex, oil, enamel, alkyd etc.
What type of paint should be used to paint molding?
You can use either water or oil based paint, which are both available in a variety of sheens to paint molding. Water based satin coatings are very popular for crown molding in 2012 and have been for several years, while an oil based semi-gloss are the best choice for baseboards and door moldings where available.
Can you mix white satin latex paint with yellow semi gloss yellow paint?
Sure you can!it will work just fine
What type of paint is used in hotels?
Many hotels that use paint use satin or semi-gloss latex paint in their interior applications.
Can you paint latex satin over acrylic semi-gloss enamel?
Yes, you can paint latex satin over acrylic semi-gloss enamel, but proper preparation is essential for good adhesion. Start by cleaning the surface and lightly sanding the enamel to create a better bonding surface. After sanding, wipe away any dust and apply a primer if needed, then proceed with the latex satin paint. This ensures a smooth finish and enhances durability.
Can you mix acrylic paint and satin paint?
If they are both of the same base you can. Satin paint can be an acrylic or a latex,or an oil. Check on the can cleaning instructions for base. Jason Pollock used both in his work 'Bluepoles' which hangs in the Canberra museum I think
Can you paint over semi gloss with a satin?
Yes as long as you use the same base paint. You just need to sand it enough to where the paint will adhere. Make sure if the original paint is latex, use latex. If its oil based, use oil based.
The paint on cabinet doors won't dry I sanded the doors then primed them with Kilz Oil base the paint is satin sheen latex What is wrong?
I don't believe you can put latex paint over an oil base. it will never dry and will always be tacky
What is the best type of paint for crown moulding Flat Semi-Gloss Satin etc?
Generally, a satin or semi-gloss sheen is best for decorative trim. The shinier paint will be a bit easier to apply, be smoother after application and will accent the crown molding. I always paint crown, doors, door trim, and baseboards in high gloss. Here in the south we also use only one color, white. I also use ceiling paint as the primer coat because I paint it (the crown moulding) when I paint the ceiling. Then I apply 1 coat of high gloss on the crown. Then I paint the last coat that has been thinned a little with water (2 tablespoons per cup of paint) This goes on very fast and smoothe and when finished looks like wet vanilla ice cream. When you paint high gloss, be advised that you have to keep a wet leading edge, meaning that if you stop painting and the paint is allowed to dry, it will show where you stopped and then restarted. The same is true for semi gloss and satin.
Can you mix latex satin exterior and latex matte flat interior?
It's not recommended to mix latex satin exterior paint with latex matte flat interior paint. The two paints have different formulations and finishes, which can lead to adhesion issues, uneven appearance, and varying durability. If you need a specific finish or color, it's best to choose a compatible type of paint designed for the same environment and application. Always consult the manufacturer's guidelines for optimal results.
Can gloss latex paint be changed to satin latex paint?
LOL...no sorry, it will just be a bit shinier than anticipated. (gloss is quite scary if painted over an entire wall - better for trim and cabinets, etc)
Is epoxy paint the same as latex?
No. They have different textures and looks.
