I know it sounds like a silly answer, but if you need to ask how.. your not ready to tackle the task.
To put it into basics
Drain radiator and remove
Remove electrical connections from motor
Remove drive shafts
Support motor with hoist
Remove engine mount bolts
Lift motor and transmission out.
There are differences with every car, but in general you start with being organised. If you intend to put this engine back in the car it's an excellent idea to take a series of photos ( preferably with a digital camera )of the whole operation. This way if you are unsure of how something was arranged you can check it on your computer.
First remove all wiring, starting with the battery. If necessary put labels on parts especially wiring ends. Next remove the fuel lines and make sure exhaust (muffler). Drain and then disconnect the radiator. If the transmission is staying in the car, unbolt it from the engine. Now disconnect engine mounts. Now you may need to remove the hood. I always spray a light coat of primer over the hinges onto the bottom of the hood, this way it's easy to get the hinges in the exact position layer. Now fix the rope or lifting chains firmly to or around the engine. Most engines have at least two lifting lugs . DO NOT lift from any accessories. Have at least 2 or 3 people handy to help with the lift.
Please be careful, engines are heavy.
Quite a big job. Pretty much the same as removing any other engine, but it looks like you have to disconnect the OS driveshaft and the prop then the housing that they connect to.
How do you replace a 1992 Celica GT antenna
it is located in a canister on the top right side of the engine. remove the plastic engine cover on the top of the engine and you will see it. The cover is held on by two screws and four acorn nuts.
Could you speak english please?
It is in Santa Fe.
Her paintings are in lots of museums which exhibit 20th century paintings.And of course the Georgia O'Keeffe Museum in Santa Fe .
The Washer pump is on the bottom of the reservoir - but you have to remove the front bumper to access it, so be sure it it sht pump and not the switch. Yes I said you have to remove the front bumper to access it. You can go to the very helpful Hyundai web site http://www.hmaservice.com create a login and see schematics. It's a little tricky, but with trial and error you can see just about everything.
The 2007 Hyundai Santa-FE has a V6 engine.
The 2009 Hyundai Santa-FE has a V6 engine.
The 2014 Hyundai Santa-FE has a V6 engine.
The 2005 Hyundai Santa-FE has a V6 engine.
The 2006 Hyundai Santa-FE has a V6 engine.
how to remove transmission on Santa Fe
The 2001 Hyundai Santa-FE has an inline 4 engine.
The 2010 Hyundai Santa-FE has an inline 4 engine.
The 2002 Hyundai Santa-FE has an inline 4 engine.
The 2011 Hyundai Santa-FE has an inline 4 engine.
The 2013 Hyundai Santa-FE has an inline 4 engine.
The 2003 Hyundai Santa-FE has an inline 4 engine.