Under the hood -It's mounted on the evaporator case on the Passenger side-There are 4 screws in a square pattern-they are about 4 inches apart-remove the rubber vent hose-little ground clip on one of the screws & the 12 volt power wire-BE sure 2 use calking 2 reinstall the new blower motor after u install the blower fan (Squirrel Cage)
Unbolt it from the floor.
Chevy truck.
Yes it will, samething
Thermostat stuck open, heater core clogged, or the heater temperture control vlalve is defective.
i believe it is up to 86 maybe 88 that are the same truck.
Its should be behind the glove box.. held in by 1 screw
how do I change the heater blower on a f350 2002
Remove the water supply hoses from your 1992 Chevy S 10 pickup truck heater core. Remove the heater core retaining bolts. Reverse the process to install your new heater core.
First, take a socket wrench to remove the cover of the blower motor of a 1993 Chevy truck. Then pull the motor blower out and install a new one in its place. Lastly, screw the bolts of the blower motor cover back in.
Only for the high speed blower function. The lower speeds go thru the blower motor speed resister.
you need the special tool its about 30 bucks from snap on
replace heater core in a 1991 Chevy work truck 1500
If you are asking about the blower you only have one that controls both the heater and the a/c............
need diagram for heater core for a 1994 Chevy truck.
This is not easy. Get a manual from AUTOBOOKSONLINE.COM It is under the dash on the passengers side of the truck. You shouldn't have to remove the whole dash.
the blower motor is located on the passenger side firewall under the hood remove 3 or 4 bolts and the motor will come loose
The blower resistor on a 1999 Chevy truck Z1500 is located behind the glove compartment. There is also a resistor on the firewall next to the blower motor itself.