On the passenger side you must remove the air filter box. You will need a small arm to reach the light but it is possible. One of the reasons I will never buy another one. On the divers side it is much easier. Remove the air valve and you can reach the light. Good luck the first time. It is not an easy job. the manufacture has designed this to make you want to take it to the dealer to have this done.
you shouldn't just follow your coolant hose
A Dodge Durango window motor can be ordered from any auto parts store. The prices for the window motors will vary depending on the year of the Durango.
You can find the third row seat in your Dodge Durango behind the second row seat. The Dodge Durango third row seat is usually the last row of seats in the vehicle.
Check the starter! It happened to my 2000 dodge durango too.
The 2004 Dodge Durango EGR valve can be found on the firewall in the engine compartment. The EGR valve will be on the passenger side of the firewall.
it is behind the passenger side headlight assembly. you will have to remove the headlight assembly to replace it.
You have to unbolt the entire soft bumper and remove. The dealer did this on my car to replace the headlight assembly.
for a 1994 Grand Caravan (probably like the 1995) see: How do you replace the headlight assembly located on a 1994 Dodge Caravan? for a 1994 Grand Caravan (probably like the 1995) see: How do you replace the headlight assembly located on a 1994 Dodge Caravan?
The taillights are an assembly. The lens covers can not be replaced separately
To replace each headlight assembly on a 2009 Dodge Charger is $100.73. So it will be more than $200.00 to replace both headlights.
1) open the hood. 2) Carefully remove the three screws holding the headlight assembly in place. In my case the screws were black. Be careful as they are screwed into plastic. 3) Carefully slide the headlight assembly out. At this point you can replace the headlight bulb, turn signal bulb, or the entire headlight assembly. To replace the headlight bulb turn the collar holding the bulb in counter clockwise. Pull the bulb out of the headlight assembly. Replace the bulb. Insert the bulb into the headlight assembly insert the collar and turn clockwise until it locks. 4) Carefully insert the headlight assembly back into place. 5) Replace the three screws removed in step 2 being carefull not to over tighten.
You Can't. Its all one assembly. I thought this could be done, but a dodge mechanic told me otherwise
I need to replace the bulb on the driver side of my 2003 Dodge Grand Caravan. After searching this forum I found a similar question regarding the 2000 Caravan. It talked about under the hood removing three screws and pulling out the headlight assembly. I tried this and it worked on the 2003. 1) open the hood. 2) Carefully remove the three screws holding the headlight assembly in place. In my case the screws were black. Be careful as they are screwed into plastic. 3) Carefully slide the headlight assembly out. At this point you can replace the headlight bulb, turn signal bulb, or the entire headlight assembly. To replace the headlight bulb turn the collar holding the bulb in counter clockwise. Pull the bulb out of the headlight assembly. Replace the bulb. Insert the bulb into the headlight assembly insert the collar and turn clockwise until it locks. 4) Carefully insert the headlight assembly back into place. 5) Replace the three screws removed in step 2 being carefull not to over tighten.
In a fuse box under hood.
I detail used cars at local dealerships and I have restored many Caravan headlight lenses. I use a product called Crystalenz, it works great and is really easy to use. You DO NOT have to replace the lenses. Check out their website www.crystalenz.com for more info. for removal, see: How do you replace the headlight assembly located on a 1994 Dodge Caravan?
Directions straight from the owner's manual. 1. Open the hood and remove the headlight assembly mounting screws. 2. Pull the headlight assembly forward to access the bulbs. 3. Turn the bulb assembly retaining ring counterclockwise and pull the bulb and socket assembly from the housing. 4. Remove the bulb from the socket and replace the bulb. 5. Reinsert the bulb and socket assembly and turn the retaining ring clockwise to secure the bulb. 6. Reinstall the headlight assembly.
How to replace the inside Spectra Heater Core on a 2000 dodge durango??