Want this question answered?
yes
No, you have to buy the nozzle that will much the pocket hose, you can find it online at eBay, Amazon etc...
when trigger pulled it sucks water from the storage area and dispenses it out the nozzle
Spray paint is facilitated by passing paint through a nozzle that will break up the paint into particles that can be sprayed onto the surface being painted. The paint is pushed to the nozzle by either hydraulic pressure or by air pressure depending on viscosity. On a hydraulic, or airless sprayer, the fan is formed by the tip itself with a tip only allowing a single fan width and volume. Air spray guns have adjustments to allow for more or less material volume and varying spray widths without having to change out parts of the gun. Pertaining to static electricity: Spray paint works through a process called electrostatic spray painting. The nozzle of the container is negatively charged, and the target is positively charged. Therefore, when the paint is sprayed out through the nozzle, it becomes negatively charged, and is attracted to the positive target, resulting in a paint job that saves paint, gives a smooth surface, and speeds drying.
Yes, that's what I usually do. Pick a nozzle that gives about 6" spray and get all the old paint off.
As long as the hole through the nozzle was the same size for all three, then, yes.
use small bristle wire brush to unclog spray nozzle
Pam
First you put the nozzle were you want to spray and then push the handle down.
spray pam on them
I think it would be spra butter or vegetable oil spray. it keeps it from sticking to the pan.
nothing
PAM cooking spray was the original cooking spray on the market. It is made of oils to be used as a substitute when cooking in place of butters or shortenings. Other brands of cooking sprays followed the lead of PAM.
yes
The Injector nozzle consists of a needle valve and a series of fine orifices in the nozzle tip. Its task is to inject fuel in an atomised spray pattern and distribute it into the combustion space.
No, you have to buy the nozzle that will much the pocket hose, you can find it online at eBay, Amazon etc...
Spiral nozzle is a full or hollow cone spray nozzle,jet angle range can be 30°-180°.flow rates range from 5.5 to 4140 l/min.Spiral nozzle has NPT or BSPT external thread type. Usually 1/4 inch to 6 inch nozzle can be used brass, SS304, 303, 316, 316L materials , as spiral nozzle factory, we sell and manufactuer mutli spiral nozzles.