answersLogoWhite

0

A lightweight flywheel doesn't make the car go faster because it doesn't increase the power output and the weight that it saves is irrelevant. What it does is that it improves throttle response which means that it makes the engine rev quicker, and it makes the car feel faster.

User Avatar

Wiki User

17y ago

What else can I help you with?

Continue Learning about Art & Architecture

What does a ignition starter do on performance of a car?

The ignition starter has nothing to do with performance. It just starts the engine.


Suzuki lt160 1990 the starter is just free spinning it is not turning the motor over what do you do?

sounds like the ring gear or flywheel is worn if you have a manual or stick shift put it in 2nd gear depress clutch let car roll a little release clutch (the engine will turn slightly) then try starting engine. with auto transmission you will have to turn engine over with socket and ratchet bar (if you cant turn over at the drive belt by hand) if this starts your car the flywheel will need replacing... Could also be the bendix ... the solenoid that engages the starter motor to the flywheel.


Why would a car fail to start if the battery is in working order?

There can be several problems if a car will not start. Does the motor turn over? That means, does the starter engage the flywheel and turn the crankshaft. It is the normal sound you hear when you first turn the key to start the car. If that isn't happening, you would look at the starter first. Make sure it is engaging the flywheel and trying to turn. Sometimes a battery with low voltage will get the starter to engage, but not enough to turn the flywheel. If the starter is good, but the flywheel does not turn, the crankshaft might be bound up. This is usually due to a bad motor. If the crankshaft turns, and it just cranks and cranks, then it's either fuel or spark. Check to make sure you have gas in the car. The fuel pump can be bad, or a fuel filter. If that's good, you have to check the spark plugs and distributor and/or coils. That is a bit tricky for a novice so it's best to have a mechanic look at it. Unless your willing to brave 40,000 volts.


Where is the starter relay on a 2000 Oldsmobile Intrigue?

attached to the engine near the flywheel You have to go under the car. toward the back of the engine.


What is the diiference between a VW 6 volt flywheel or 12 volt flywheel?

I think you should check your terms. Voltage has nothing to do with the flywheel at all. I can only assume you are talking about 6 Bolt or 12 Bolt flywheel. The difference between that is clear. It is the number of bolts used to fasten the flywheel.I think before answering one should understand the VW.This question is relevant to the old beetle not the new beetle.They were used on bugs up to 1966.The 6 volt flywheel is from a 6 volt car , It is smaller in diameter and has a different tooth count than the larger 12 volt flywheel.It will only mesh with the 6 volt starter.If you are converting a bug to 12 volt and changing the starter and flywheel you'll have to grind out the bell housing on the 6 volt transmission.A lot of people leave the starter 6 volt when converting to 12.All the old bugs have the same number of flywheel bolts.One large gland nut, that's all

Related Questions

How much does a funny car piston weigh?

A funny car piston typically weighs around 1.5 to 2 pounds, as they are designed to be lightweight to improve acceleration and performance in drag racing.


How can I improve the performance of my soapbox derby car wheels?

To improve the performance of your soapbox derby car wheels, you can try using high-quality bearings, ensuring proper alignment, reducing friction by lubricating the wheels, and using lightweight materials for the wheels. Additionally, maintaining proper tire pressure and choosing the right wheel size can also help enhance performance.


How can you get better acceleration in your Nissan 300zx?

more power, or shed some weight of the car. I'd recommend lightweight rotating components such as. underdrive pully, lightweight clutch/ flywheel. light rims, and lightweight single piece driveshaft


What all are homosexual feelings?

Auto performance chip can really improve car performance


How can I improve my soap box car design for better performance and speed?

To improve your soap box car design for better performance and speed, consider reducing weight by using lightweight materials, optimizing aerodynamics by streamlining the shape, ensuring proper wheel alignment for minimal friction, and using high-quality wheels and axles for smooth rolling. Additionally, fine-tune the balance and weight distribution of the car for improved stability and control during races.


Where should weight be added to a pinewood derby car to improve performance?

Weight should be added to the rear of a pinewood derby car to improve performance, as this helps increase traction and stability during the race.


Is it necessary to change flywheel while replacing a clutch of a car?

No, there is no need to replace the flywheel but it is a good idea to have the flywheel surface machined.


Can you change the timing on a jetta 2005 just by removing the flywheel?

No, and you need the flywheel if you expect the car to move. Timing is adjusted in the distributor, not by the flywheel.


What mechanical changes have been made to improve the performance of the new model of the car?

The new model of the car has undergone mechanical changes to enhance its performance, such as improvements to the engine, suspension, and aerodynamics.


Does a bov damage a car engine?

Turbosmart BOV's are designed to improve the performance of the turbocharger system. They will not usually damage a car engine.


What is a long lasting car air purifier?

A long lasting car purifier is used to improve the performance of a car, increase gas mileage, improve towing power and boost horsepower by increasing the amount of air in the engine.


Can you use an automatic transmission car Engine in a manual transmission car and what modifications should I make to the manual car?

yes you can all you need to do is switch the automatic flywheel and putt on a standard flywheel and make sure the clutch from the transmission will bolt up to the flywheel.