If you are having problems with interior door locks on a Ford around that year it is most likely the door lock actuators. There is one on each door. They are very prone to fail on those vehicles. On several occasions I have had to replace every single door actuator on Fords of that age. The actuator is behind the door panel, and fairly easy to access once the panel is off. I don't believe door lock actuators are very expensive for that vehicle, but you may want to have a repair shop verify that is the problem.
try looking on the door jams of the back doors themselves. it is there on my caddy.
The rate for installing an interior door is : $ 41.81 $ 107.96.
Tell me if just one window or all of them quit working
The width of a standard interior door is 32 inches. There are many other standardized sizes ranging from 18 to 36 inches depending on the application.
are they the factory locks?? if so it could bea vaccum line it operates on vaccum lines. or it could be the ground.
On a 1998 Ford Explorer : Yes ( as long as none of the key cylinders has been changed )
Is door ajar light on also?
Automatic door locks engage on the 2003 Ford Explorer for safety.
The door locks are not computer controlled.
No, the door on a 1998 Ford Explorer will not fit a 1992 Ford Explorer.
Yes. It will be bundled in with other interior accessories.
I have 1998 it is your door jam switchs
you might have the child safety locks activated
How do you reset the auto locks on a 1998 Subaru. Disconnected the battery to clean terminals. Now the auto lock does not work from the door switches
Try turning the ignition on and off about 10 times until the door locks, lock and unlock, then lock with the remote done.
how do i replacement my blend door in my 1998 ford explorer
If you don't mind me asking... Why are you changing the door switch ? If it's sticking or the interior lights are staying on. Try this trick. Spray WD-40 on all door locks including the rear door hatch. This will fix the problem.