between 24-48 hours depending on 1, the quality of the gloss, and 2, how thick you apply it.
Have fun! Its a crap job!!!
No. You must sand the gloss of and them prime and then paint. Semi and High Gloss is only meant for wood not dry wall. Its the worst idea ever to put a gloss on dry wall. Any paint with an Enamel is just as washable.
No, it's not flammable.
If on poster paper, it's usually dry within an hour.
24 hours
long enough for u to learn to spell
No. You must sand the gloss of and them prime and then paint. Semi and High Gloss is only meant for wood not dry wall. Its the worst idea ever to put a gloss on dry wall. Any paint with an Enamel is just as washable.
No, it's not flammable.
Watercolour has a short drying time. It only takes minutes for the paint to dry. The time it takes for the water to dry is how long it will take for the paint to dry.
Latex paint typically takes about 1-2 hours to dry to the touch and 24 hours to dry completely.
Latex paint typically takes about 1-2 hours to dry to the touch, but it can take up to 24 hours to fully cure.
If on poster paper, it's usually dry within an hour.
24 hours
long enough for u to learn to spell
The time it takes for paint to dry on wet wood can vary depending on factors like the type of paint and the thickness of the coat. In general, it can take anywhere from a few hours to a few days for paint to fully dry on wet wood.
Patch and paint drywall typically takes 24 to 48 hours to dry completely.
Semi-gloss paint sometimes has problem sticking to walls that have a higher gloss paint type already on them. Usually, a light sanding and a coat of primer will help. Sometimes, semi-gloss paint peels if it was applied during high-humidity weather, as it doesn't dry all the way through.
Many would say that a semi-gloss, flat or satin finish would be best for a houses exterior. The semi-gloss is suppose to be the easiest to clean later on. The flat or satin finish paints, do not have reflective shine when dry.