0
More than 3 days will be fine.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How long does a 2x4 of Douglas Fir wood have to dry before you can paint it?
If you stain with a breathable stain such as from SANSIN Corporation, you may coat anytime. If you're sealing it, you should wait until the moisture content is at least 12%. I can't tell you how long to wait because that depends on the humidity, temperature, how long it has already been cut etc.
Can you stain over Thompsons waterseal?
I've never tried that as it's not generally done. Staining is usually done before sealing.You'll have to remove the Thompson's before you stain unless it has been long enough that the Thompson's is no longer effective. To test to see if the surface will take stain, spray some water on it. If it beads up, it will not accept a stain.
Can food coloring stain your mouth?
Yes it can, however, it shouldn't last long.
How soon after applying pre stain wood conditioner do you pply the stain?
I always let it have about 3 days to fully dry. -Maybe quite long, but I feel secure about that.
Can you stain one year old pressure treated wood that was just sanded bare blonde?
Yes, you can stain pressure treated wood as long as it has had several months to dry out.
How long should you know a guy before inviting him to your house?
6months to a year
How long was a long house?
A long house was 100 yards long. it hold up to 12 families. If you are planing to make a model, you should PLAN it out before you start. think how you are going to build it.
How long does a 2x4 of Douglas Fir wood have to dry before you can paint it?
If you stain with a breathable stain such as from SANSIN Corporation, you may coat anytime. If you're sealing it, you should wait until the moisture content is at least 12%. I can't tell you how long to wait because that depends on the humidity, temperature, how long it has already been cut etc.
Can you stain over Thompsons waterseal?
I've never tried that as it's not generally done. Staining is usually done before sealing.You'll have to remove the Thompson's before you stain unless it has been long enough that the Thompson's is no longer effective. To test to see if the surface will take stain, spray some water on it. If it beads up, it will not accept a stain.
How long should you be together before having children?
Parnets should be together for maybe two years before having children but if they are ready to have children then they should and when i say ready i mean a steady job good income and a house.
What is the consequence of leaving a stain on the bacterial smear too long over staining?
Leaving a stain on too long generally stains everything; leaving little contrast. Leaving a stain on not long enough doesn't stain enough; leaving little contrast.
How to Stain a Concrete Driveway?
Most concrete driveways are not attractive to the eye and can be covered in automotive fluid stains. A concrete stain will hide these stains and will make the home look better. It will also add a touch of color to your home and yard. The first thing you need to do is figure out what type of stain that you want to use. A water-based stain is easy to use but do not have too rich of a color. An acid stain is harder to use but gives better patterns of color and goes deep into the concrete. Any paint and sealant would just sit on top of the concrete and scratch off very easily. Whichever type you choose, make sure that you get enough to cover the driveway completely. You should measure the driveway’s width and length so you know the area that needs to be covered. Also, remember that the stain you choose might needs more than one coat. Before applying any stain, you need to clean off the driveway. Everything should be taken off of the driveway. A concrete degreaser will help get off any fluid stains or dirt. It can be found at any hardware or home improvement store. A pressure washer can be used to rinse off the degreaser and any dirt. Then, you should use a clean broom to sweep away anything sitting on the surface of the concrete. Before applying the stain, you must be in the appropriate attire. You need to keep your skin protected for the stain. You should have long pants and a long sleeved shirt on. Also, boots, gloves, and goggles would be a good idea. This is because stain is toxic and can cause skin issues if they touch. Use a pump sprayer to disperse the stain. You should start spraying in a corner and go a few feet at a time. Instructions from the stain will tell you how long to let it sit before applying another layer. Finally, put a sealant over the stain once it is dry. This will protect it and make it look polished. It should be laid out with a rolling brush.
How long does a house lien last on the house before it is dropped?
Until the money that is owed is paid.
How long does it take for a stain to set in?
Depends on the type of stain, but usually about i would say 3 minutes.
How long before a baby can enter a painted house?
Once it dries
First home buyer should wait how long before refinancing?
First home buyer should wait how long before refinancing?
How long should a house phone number be?
11 numbers
