0
How much does it typically cost to replace a starter in a 1997 Acura TL 32 with a rebuilt starter?
just called Schuck's Auto Parts here in WA state and they have available a rebuilt starter for my '96 3.2 TL for $181.00 + my old starter. However, since an auto shop will jack up their buying price 20% to 40%, you'll pay appreciably more than this, if you have an auto shop replace it. My guess is two hours labor at at least $65/hr + the cost of the starter at about $250.00. You'll be looking at about $400.00, or you can replace it yourself and save more than $200.00.
What else can I help you with?
How do you replace a starter on an 97 Acura 3.2 TL?
The starter is located on the top of the engine, on the driver's side under the intake manifold. You remove the rear manifold mounting bracket to get to it.
What do you do if the key is stuck in your Acura Vigor switch?
Replace your ignition lock assembly.
How much should it cost to replace a radiator in an Acura Integra?
if u do it urself n buy the radiator for liek 120-150 bucks
Haw to change light bulbs in climate control panel acura integra 1995 special edition?
When changing the lights on a 1995 Acura Integra remove the dash on the center console and pull it off. Remove all the accessories and reach the old bulbs. Replace the bulbs.
You put the key in to start your 1998 Acura Integra LS but it wouldn't start so you checked the starter plug and pushed it in then the car started but the check engine light came on what does this mean?
You may have knocked off a wire when you reconnected the starter wire, Check the wire going to the O2 sensor. if this isn't it take it to a shop and have them scan the ecm. It could be a flewk.good luck....Michael
How do you change an 1995 Acura Legend starter?
To change a 1995 Acura Legend starter, remove the 4 bolts around the intake pipe and lower radiator hose. Remove the starter and replace with new.
How do you replace the starter on a 1993 Acura Legend?
must lower the exhaust system
How do you replace a starter on an Acura RL?
To replace the starter on an Acura RL, begin by disconnecting the negative battery terminal to prevent electrical shock. Next, remove any components obstructing access to the starter, such as the air intake duct or engine covers. Then, unbolt the starter from its mounting location, disconnect the wiring harness, and replace it with the new starter. Finally, reassemble any removed parts, reconnect the battery, and test the new starter.
How do you replace starter on 1997 Acura CL 2.2?
Ansewer the question for me then I'll tell you the ansewer......
How do you replace a starter solenoid on a 1993 Acura Vigor?
To replace the starter solenoid on a 1993 Acura Vigor, first disconnect the negative battery cable to prevent electrical shock. Remove the starter from the vehicle by unbolting it from its mounting location and disconnecting the electrical connectors. Once the starter is free, remove the old solenoid by unbolting it from the starter body and replace it with the new solenoid, ensuring it is securely fastened. Reinstall the starter, reconnect the electrical connections, and finally reconnect the battery cable.
How do you replace a starter on a 2004 Acura MDX?
To replace the starter on a 2004 Acura MDX, first disconnect the negative battery terminal to ensure safety. Remove any components obstructing access to the starter, such as the intake manifold or heat shields. Then, unbolt the starter from its mounting and disconnect the electrical connectors. Install the new starter by reversing the steps, ensuring all connections are secure before reconnecting the battery and testing the vehicle.
How much would it cost to replace the starter and to fix a hole in the muffler on a 1996 Acura integra?
nothing, do it by yourself
How do you remove starter 2002 Acura 3.5 RL?
How to remove starter on 2002 Acura 3.5 RL
How do you change a Acura TL 2.5 starter?
To change the starter on an Acura TL 2.5, first disconnect the negative battery cable to ensure safety. Then, access the starter by removing any components obstructing it, such as the air intake or engine cover. Unbolt the starter from the engine block, disconnect the electrical connections, and replace it with the new starter. Finally, reassemble everything, reconnect the battery, and test the new starter.
Where is the starter located on a 03 Acura RSX?
The starter on a 2003 Acura RSX is located on the driver's side of the engine, near the transmission. It is positioned at the bottom of the engine bay, making it somewhat challenging to access. To replace or service the starter, it may be necessary to remove some components for better visibility and access.
How do you remove the starter on a 92 acura vigor?
To remove the starter on a 1992 Acura Vigor, first disconnect the negative battery terminal to ensure safety. Then, locate the starter, which is typically situated on the engine block near the transmission. Remove the electrical connections and the mounting bolts securing the starter in place. After detaching the starter, you can carefully pull it out from its housing.
Where is the starter located on a 3.5 rl acura 98?
does anyone know where a starter is located on a 98 acura 3.5 RL
