Junk yards in your area or online aftermarket, Certi-Fit auto parts has most front end body parts, headlights and a fair amount of doors, rear repair panels and tail lights. Hoods are around $125 but there is a lot of variance in price depending on the make of the car.
No.Your 98 Honda Accord sun visor is only compatible with:98-03 Acura CL99-03 Acura TL98-02 Honda AccordA sun visor from a 98 Honda civic is compatible with:96-00 Honda CivicIf you still need help finding a sun visor you may want to read this blog post:http://www.oempartsguys.com/blog/how-to-find-your-replacement-sun-visor/
i dont know exact size wrench but if you are having trouble making wrench fit, u need to use metric wrench
Check the Idle Air Control. It might have carbon deposits and need cleaning. Also do the same for the throttle body intake. It might also need cleaning.
In order to answer your question, I need more information such as when you turn the key what sounds do you hear eg: clicking, rubbing, grinding, arcing or nothing? When was the last time the vehicle was serviced, and what did they service? Three things need to happen when you turn the key and several switches need to checked in order for the firing sequences to happen. So the more you can tell me the better I can help you.
If you can still see the wire, use pliers and pull, it should release the hood.
Yes, but you will need 1999-2000 head lights, fenders, grill, hood, and front bumper.
Yes, but you will need 1999-2000 head lights, fenders, grill, hood, front bumper and rear bumper.
No it will not. It can fit, but you will need head lights, fenders, hood, grill, and front bumper from a 1999-2000 Civic. Transmission doesnt matter.
need diagram to install 2000 Honda civic syder fog lights
My 2000 Civic has over 100.000 miles on it. It takes 5W20 oil and a "15400-PLM-A02" filter.
When the hood is stuck you need to push down on the hood just above the "H", sometimes quite hard. Then the hood release will work and open the hood.
If it is a chain, never. If it is a belt, usually around 100,000 miles. The break point on a 2000 civic is 120,000.
If you have an owners manual it will be in there. If not you will probably need to find a PDF of the manual online.
The cylinder head torque on a 2000 Honda Civic is set at two different rates. For placing the head correctly the bolts need to be tighten to 22 ft torque. Once correctly set the bolts will need 49 ft torque to be properly tighten.
I need a fuse diagram for a 1991 Honda civic DX
Need Honda Civic Ex 1995 Radio Codes?
A 2000 Honda Civic should have a standard AC system. To completely install a new system it will need a condenser, evaporator, compressor, and all the necessary hard-lines. Then the system will need to be routed correctly on the engine and wired into the ECU.