Yes.
What is the bolt pattern on 96 chevy silverado 2 wheel drive
The bolt patterns for the Dodge Dakota:Example:DAKOTA 2WD,LE H.D. & 4WD 1987-1990.Size: 14x6P.C.D.:5x114.3Lug size: 1/2 RHOS : L/MPlease see related link below!
if it has the 4.5 lug pattern- large bolt pattern and you have a 15 inch wheel
5x5. AKA 5 on 5
Wheel bolts go through a hole in the hub and are held in place by a knurl toward the head of the bolt. Search napaonline for a picture of one. To remove just take off the wheel and pound on the stud where the lug nut was. You probably have to spin the wheel until there's a place for the bolt to come out of the back of the hub.
No there rear wheel drive rims are different than front drive rims
bolt pattern is 7x4.5
No! a 1987 cutlass is rear wheel drive, the van is front wheel drive....wrong offset.
8x6.5
15x115
Yes if they are the proper size and have the same bolt pattern.
8x6.5
its 5 on 135mm
no it is not. the bolt pattern on the back of the engine where the transmission bolts up is different. the cavalier is front wheel drive, the s-10 is rear wheel drive
The bolt pattern on a 1989 and up Chevy two wheel drive is 5 on 5 im not sure what it is for a 4x4 The bolt pattern on a 1989 and up Chevy two wheel drive is 5 on 5 im not sure what it is for a 4x4 The bolt pattern on a 1989 and up Chevy two wheel drive is 5 on 5 im not sure what it is for a 4x4
f150 can a4 wheel drive wheel fit on a 2 wheel drive f150 both 6 bolt pattern
it is a 6 lug