High idle condition is often the intake gasket on this engine. The 'book' on this is about $400 labor.. Probably could do it at home, but it's a lot easier to get to if you tilt the motor forward. We paid to have it done :( High idle condition is often the intake gasket on this engine. The 'book' on this is about $400 labor.. Probably could do it at home, but it's a lot easier to get to if you tilt the motor forward. We paid to have it done :(
A blown head gasket on a 94 Ford Crown Vic is fixed by removing the cylinder head, cleaning the gasket surface, and installing a new gasket. The head gasket is extremely important as it prevents oil and water from mixing and contains the vehicle's combustion.
Don't know what the labor rates are in your area but it should only take .5 hour to r&r that mirror with a new one.
My '01 Focus just blew its head gasket. The mechanic quoted me at $1200. At ford Dealer ship? Yea have fun spending that kind of money. The gasket itself you can pick up for 30$ max. Find someone who knows even a little about a car, and they will prolly do it for 50$ and a six pack of beer. My friends have replaced a head gasket on a civic and its really easy if u know what your doing.
Depending on where a person lives and where they have the repair done, the labor for replacing the starter on a 2000 Saturn SL2 will cost between $186 and $238. The cost for the parts will be $149 to $261 plus tax.
People advertise on Craigs that will do it for a few hundred- many do head gaskets only. about half what a dealer would chaarge. A gasket is only 35.00 but it is a lot of labor, it could easily take a full day or even a weekend. If head needs milled because it is warped will be a couple hundred more.
The labor charge to replace and intake manifold gasket, on a 1999 Chevrolet Tahoe, is approximately $180. It takes approximately 2 1/2 hours to replace the gasket.
around 6-7 hours according to AllData
to replace the intake gasket would be about 4 hours labor. parts would run about $50
The gasket set is $55.00 The labor is $250.00
56.00 for the part and 100.00 per hour for labor In Canada the part is abound 30$ and 3 hours labour I wish it was $100 per hour My dealer is $82
To be fair: about 4 hours. I charge $240.00 labor to do that job.
I'll assume Lower Intake Gasket, since they tend to cause vacuum leaks. Get a manual from Autozone and expect about 4 hrs labor, you need to take off the upper intake manifold just to replace the Lower Intake Gasket. Probably should change/clean the PCV valve while ur in there. Good luck, man.
Parts and labor aprox $600 to $700. It also depends on your location.
I was just quoted 5.5 hours labor to R&R the intake gasket on my 1998 GMC Sierra 5.7 Liter.
It should take about an hour to change the intake manifold gasket. This part can be replaced by taking off the intake manifold cover, cleaning the old gasket off and sealing a new gasket in the space and tightening the bolts. When other things are in the way, like the alternator, it will take longer.
Its probably around $500 mostly because of the amount of labor that it takes to replace it. However if you just order the gasket from the auto parts store and replace it yourself it'll only cost you $20.
250.00 $ Labor only is going price.