Wiki User
∙ 15y agoif its burnt out, replace it, if not, check the wireing
Wiki User
∙ 15y agoWiki User
∙ 15y agoYour problem may be with any or all of these three items: The fuse, brake switch or bulbs in the brake lights.
NO
in the engine area directly in front of the steering wheel
most likely a clog in the line or wheel cylinder or maybe a broke spring
There are several things I would need to know to answer correctly:What kind of vehicleWhat yearWhat type of brakesThe fact that one brake does work means there is an underlying problem with the rest that needs to be repaired.Usually on a car one brake working means that the other three have seized hydraulic systems in each brake and require the replacement of the cylinders or Calipers.
Check for a loose connection Check for a loose fuse in the fuse box Check for an open wire in the brake light circuit
how to change third or center brake light on Chevy beretta 95
Brake light switch defective or out of adjustment.
go to a repair shop
it is a 1995 Chevy blazer and it will not go into park. have to use the emergency brake when stopped, and neutral to start it
3/8"
Check your brake fluid. The light will come on due to low fluid. Or someone has yanked your E-Brake.
could be that the emergency brake cable is stretched and the pedal has fallen down a bit.try lifting up on your emerg brake pedal
anti lock brake system light might mean a bad brake sensor must be replaced
BEHIND THE BRAKE PEDAL
under the hood, directly in front of the driver. It is bolted to the brake booster which looks kinda like a bloated flying saucer.
Does the Hydraulic clutch pump brakes alot on 1989 chevy berette gtu 2.8liter 6cyclinder 5speed
As far as I know, they are not on the same fuse/relay.