Protect your floors with carpenters paper, and paint the walls first. Then, once dry, sand the floors and stain them.
If you stain them first, then paint the walls, you risk damaging the floors while painting the walls, and may have to re-sand and stain them again.
However, if you are a contractor, really it has to do with the availability of your subs.
My garage floor needs a new coat of paint. What is the best garage floor coating paint?
Latex paint can stick to the floor grouting.
First prime it with a concrete floor primer, available in Home Depot about $25 per gallon. - You will use much less finish paint this way.
The first step in refinishing a metal fire escape is to clean it. After it is cleaned, you will need to use an anti-rust metal primer. Then you can paint it, using two coats of exterior oil based, high gloss paint.
It is best if you do remove the old paint first.
form_title=Paint Refinishing form_header=Refinish the paint in your home with help from professionals! How many rooms do you want to refinish the paint in?= {(),1,2,3,4,5,6,7,8,9,10,11,12,13,14,15} What colors do you want to use?=_ What is your budget for the refinishing? =_
yes
Home stores such as the Home Depot have specialists that can help you refinish your kitchen. They can give you tips and advice on how to refinish the kitchen within your wants.
jackson pollock
Clean the surfaceSandOil, wax, or lacquer to finish.
If you need to refinish a bathtub, you will probably need some appliance paint. You can get this by ordering it online from Amazon. Their website is www.amazon.com.
To refinish a concrete floor for a fresh and updated look, you can start by cleaning the surface thoroughly and repairing any cracks or imperfections. Then, consider applying a concrete stain or paint for a new color. You can also add a decorative finish like epoxy coating or polishing for a modern touch. Finish with a sealant to protect the surface and enhance its durability.
To refinish your garage floor for a better look and durability, start by cleaning the surface thoroughly. Then, apply a concrete sealer or epoxy coating to protect and enhance the appearance of the floor. Make sure to follow the manufacturer's instructions for the best results.
Yes, you can sand and refinish a bamboo floor much like you would any other wood floor. Bamboo has a very low burn temperatures. Most manufactures recommend professional refinishing because of this.
To fix a gouge in a wood floor, you can fill it with wood filler, sand it down, and then refinish the area to match the rest of the floor.
To refinish a wood floor DIY style, follow these steps: 1. Clean the floor thoroughly. 2. Sand the floor to remove old finish. 3. Apply wood stain if desired. 4. Apply a clear finish like polyurethane. 5. Allow the floor to dry completely before walking on it.
Clean via power spray, scrape and sand, prime and paint.