you can only use diagnostic equipment to turn the alarm off or see whats wrong with it and garages rip you off on the prices they charge ezza1969
Use your key in the drivers side door turn it both ways
Has to be disactivated with a drb 3. Your local Chrysler dealer can deactivate alarm. Although you may have to pay for labor time.
If an alarm system will not allow a vehicle to start the kill-switch is engaging. The brain of the alarm will need to be disarmed in order for the vehicle to start.
First, you need to find out what's wrong with the alarm. Alarms protect you by disabling the vehicle if all conditions aren't met and for some reason the alarm thinks some of the conditions aren't met. Take the vehicle to the company that installed the alarm system. You may have to get it towed if you can't find any other way to get it there.
The iPhone comes with a clock app already installed that has an alarm clock features. This is the best alarm clock that I have found so far. Other popular alarm clock apps are:CARROT Alarm - Talking Alarm ClockWake Alarm ClockSpeakToSnooze ProSleep Cycle Alarm ClockWake n Shake Alarm ClockRise Alarm Clock
No,it will mess up your computer.
Pull the fuse.
To disable the factory alarm on a 1994 Plymouth Voyager, you can try unlocking the driver's side door with the key, as this often resets the alarm system. If that doesn't work, locate the alarm fuse in the fuse box and remove it to disable the alarm temporarily. Additionally, you can disconnect the battery for a few minutes to reset the system. If issues persist, consulting the owner’s manual or a professional may be necessary.
Lock doors with electric.
To reset the alarm on a 1999 Plymouth Grand Voyager SE, first, ensure the vehicle is in the "Off" position. Then, insert the key into the ignition and turn it to the "On" position without starting the engine. Wait a few seconds, then turn it back to "Off." If the alarm continues to sound, disconnect the battery for a few minutes and reconnect it to reset the system.
The factory alarm is part of the body computer programming and can not be removed.
To reset the alarm on a 1998 Plymouth Voyager, first ensure that the vehicle's doors are closed. Insert the key into the ignition and turn it to the "On" position without starting the engine. Then, press the "Unlock" button on the key fob or use the driver's side door lock to unlock and lock the door, which should deactivate the alarm. If the alarm persists, disconnecting the vehicle's battery for a few minutes may also help reset the system.
You can't, it is part of the body computer and can't be removed.
The alarm is located on the braking system on the Chrysler Voyager 12-2004 European model.
To turn off the horn alarm on a 1999 Plymouth Grand Voyager, locate the alarm control module, which is typically found under the dashboard or near the fuse box. You can disconnect the battery for a few minutes to reset the system. Alternatively, check the owner's manual for specific instructions on disabling the alarm. If the problem persists, consider consulting a professional mechanic for assistance.
The factory alarm is built into the Body Computer. It is not possible to unhook it.
i had the same problem i just cut one of the wires leading to the switch that was causing the problem