With that 1994 year you have a OBD I system. You can clear the memory by disconnecting the neg cable from the battery for a moment then reconnect it. If the car has a problem it will relight the check engine light again.
You do not have to reset the computer after this repair. If the Check Engine Light is on it is not because you made this repair. If you disconnected the battery the computer will reset itself.
You can't bypass or reset security system, bring it to the dealer.
No, but you can reset by disconnecting the battery for a little while to reset its memory and leaned values. Or it will relearn itself while you drive it.
The easiest way to reset the computer in your 1998 automobile is to remove the positive cable from the battery. Keep the cable off for 30 seconds and return it to its original position.
unplug the negative side of the battery leave it off for 30 seconds.Also depends what you are trying to reset, check engine light ?
Unhook the negative cable and wait ten minutes, the computer is reset.
You can try disconnecting the battery for 5 minutes, that's how it's reset on a 1991.
I think you just disconnect the battery then reconnect
Disconnect the battery for a few seconds, then reconnect.
If the transmission can be "reset" there only two possibilities.Disconnect the battery for 30 secondsHave the computer connected to a scan tool and reset.
Remove the battery cables for a couple of minutes.
brake vacuum line location on the 1991 oldsmobile regency 98
Disconnect the battery. Step on the brake pedal. Reconnect the battery.
You'll need to find a shop with a code reader that reads ABS computer codes.
sorry error in your computer please reset your computersorry error in your computer please reset your computersorry error in your computer please reset your computersorry error in your computer please reset your computersorry error in your computer please reset your computersorry error in your computer please reset your computersorry error in your computer please reset your computersorry error in your computer please reset your computersorry error in your computer please reset your computersorry error in your computer please reset your computersorry error in your computer please reset your computersorry error in your computer please reset your computersorry error in your computer please reset your computersorry error in your computer please reset your computersorry error in your computer please reset your computersorry error in your computer please reset your computer
disconnect the battery for more than 30 secs,this will reset part of the computer that locks out the control system if it has detected a fault Dave
If you are looking for an inertia/reset switch, the answer is no. The engine computer controls the fuel system with relays.If you are looking for an inertia/reset switch, the answer is no. The engine computer controls the fuel system with relays.