Examples: Iron Box, Filament Bulb Etc.,
In these equipments the power will be consumed only due to resistance of the equipment and there will not be any inductance or capacitance in these equipments. Inductive vs Resistive loads
1) Inductive loads use magnetic fields. Examples - Motors, solenoids, and relays. If it moves, it's probably an inductive load.2) Inductive loads can cause blowback voltage. Circuits should be protected from this by diodes.3) Blowback is caused by a surge of voltage created by the collapsing magnetic field in an inductor.3) Resistive loads convert current into other forms of energy, such as heat. No risk of blowback.Resistors are used extensively in almost every electronic device. A mobile phone, a transistor radio, and so on.
Earthworms are examples of annelid worms (Phylum Annelida), which also contains leeches and many typres of marine worms. Earthworms are from the Class Oligochaeta, which contanins the earthworms, some freshwater worms and leeches.
there are many advantages. yet there are also diadvantages
Three examples of prepress image capture devices are drum scanner, flatbed scanner, and scanning back for large format camera. The price of changing a print image during prepress is normally 10% of what it would cost on press.
Blower motor speed resistors are generally located close to the blower motor.
false
photo resistors, or light dependent resistors, are devices with variable resistance, that cahnges depending on how much light is hitting the device
allmost every electronic devices uses resistors..(it is needed in all circuits)
Tim tebow, cereal, pizza.
non ohmic devices are diodes, LED's, Thermistors, LDR(light dependent resistors, cells in series.
Because the device needs their electrical properties in order to work.
50 ohms
your cellular phones
Some examples of IP devices are internet modems and routers, EtherNet/IP drive devices, VoIP systems, and numerous electronic devices, such as an iPad.
The total effective resistance of resistors in series is the sum of the individual resistances.Three 60-ohm resistors in series have a total effective resistance of (60 + 60 + 60) = 180 ohms.
Examples of Output devices: Monitor and Printer. Examples of Input devices: Keyboard and Mouse.
examples of multifunction devices are ipod,iphones,and things like that
No, the transistor is very active; slight changes to the input at the base produce dynamic and substantial activity at the collector. Both resistors and coils are examples of passive elements/devices because their individual tasks and values are firmly set and do not vary.