you have a left and right bank.bank one is the side with #1 cylinder
The front wheels have abs sensors if applicable. The sensors would be mounted to the spindles not the rotors.
Toyota RAV4's have two (2) O2 sensors.
OE = Optoelectronic Sensors OE, for the most part, sense motion, stress, mechanical properties, temperature, pressure as well as chemical composition. In the majority of applications, they replace electrical sensors. In extreme cases, they outperform existing technologies and have a unique, niche market.
All O2 sensors all threaded into the exhaust system at various points.
Input Speed Sensor is on Front of Trans closer to the engine. Output is on the front, farther to the drive side. Both are two wire sensors.
There are four oxygen sensors one on each exhaust manifold or bank of cylinders and one after each cat for both banks of cylinders
Camera sensors record the image when light hits it. http://www.digicamhelp.com/camera-features/camera-parts/sensors/
what does system to lean banks 1 and 2 ? Multiple cylinder misfire?
You must mean Oxygen sensors. There are 2 upsteam (O2 sensors) and there are 2 downstream (catalyst moniters).
the banks
Ethiopia has 2 of the top banks in Africa. That doesnt mean Ehtiopia has only 2 banks but 2 of the banks in Ethiopia are the top of Africa.
The are all types of O2 sensors. The front two are the O2 sensors used for fuel control for each bank, and the rear two are O2 sensors that are used to moniter catalytic converter functions on their respective banks.
AnswerTry replacing fuel filterOxygen sensors may need replacement. As a part of the emission control system, they are designed to be replaced about every 100,000 miles (under normal circumstances).
Assuming you mean O2 sensors, the 2004 Chevrolet Malibu with the 2.2L engine has two O2 sensors, one upstream (before the cat) and one down stream (after the cat).
hombug banks in the cay
air fuel sensors
It depends what kind of sensor you mean. There are lots of sensors in trains already... for such things as heat/smoke detectors, doors (which stop the train moving unless the doors are closed, fuel, signal sensors..... etc