Trouble code P1545 means: Throttle Position Control Malfunction
Yes, it will fit and mount up just fine. But you will have to make sure the front differential gear ratio matches that of your rear differential. Or what you could do is swap the transmission from the Forester along with the rear differential from the Forester
9 - 9 + 9 / 9 + 99 = 100solution:9 - 9 = 00 + 9 = 99 / 9 = 11 + 99 = 100A more simple approach might be 99-(-99/99) which simplifies to 99+1=100.
No one gas comprises 99% of the atmosphere, but nitrogen (~78.09%) and oxygen (~20.95%) together comprise about 99% of the atmosphere (on a dry basis, i.e. not including water vapor which can range from near 0% to 5%).
Over heating, pressure in the radiator, start it cold and water will shoot out of it. White exhaust, oil that looks like chocolate milk. Depends on where the problem is which of these shows up or several may. If it is just white exhaust, it can be fixed for $6. There are several brands of stop leak that have copper in them. Follow the instructions and 99 times out of 100 it will fix the problem. If it doesn't you have wasted $6. I put 40,000 miles on a Subaru doing this and that was not what killed it.
what is the bleeding process for a 99 subaru impreza outback?
Yes.
This is not a legit Honda Code. Have it checked by a Honda dealer to retrieve the correct code.
Probably headgaskets.
EJ251
For the second time y have error 99 in my subaru outback. I am seek with this crazy problem apparently it has to do with a temporary disconection of the battery in subaru spain nobody is able to give me any explanation
Trouble code P0000 means: No fault found
Bad Vtech solenoid
The code P021 on a 99 Volvo s70 means that you need to check the ETM. This is the Electronic Throttle Management sensor which probably needs to be replaced.
Heater inlet hose on a 99 subaru legacy is on the passenger side coming out of the fire wall. One of only 2 hoses coming out of the fire wall.
That usually means your AWD is not working properly.
Trouble code P0602 means:Control module programming error