What does a starter on a 1995 Jeep Grand Cherokee Laredo look like?

Answer 1

lie on your back under the car feet facing the front, look where the exhaust joins the manifold, you should just be able to see it. to remove disconnect the exhaust where it joins the manifold (2 bolts) can be stiff, it a turbo model from under the bonnet undo the nuts that hold the turbo heat shield, remove the 2 bolts securing the starter and remove, on a scale of difficulty 1-10 prob a 4

Answer 2

It is located underneath the drivers side just above and back of the front wheel. There is a heavy plastic under carriage that is easily removed in order for you to get better access to the starter.

Answer 3

The starter motor assembly for a 1995 Jeep Grand Cherokee Laredo with a 5.2L V8 will appear as a long metal cylinder, with a shorter one atop it attached to lower rear of the engine block. There will be two hardware pieces holding the triangular metal plate of the unit to the engine. If it is an aftermarket or non-original starter installed in the Jeep the cylinders may have a brass-gold appearance.

Answer 4

Assuming it is the 4.0 motor (you didn't say), it is right under the oil filter.

Answer 5

it will be bolted where the transmission connects to the engine at the back of the engine, at the bottom.