0
From Allexperts.com P0708 indicates a problem with the signal received by the transmission control module (TCM) from the range switch (also inhibitor switch or neutral safety switch). Typically, the issue is that voltage was received on one of the circuits when not expected, typically caused by a shorted switch. P1613 simply indicates that the TCM requested the engine control module (ECM) to turn on the check engine lamp.
In most cases, replacing the range switch resloves the issue.
What else can I help you with?
Will headers for a 1999 Hyundai accent 1.5L engine fit on a 2002 Hyundai accent 1.6L engine?
No, they will not fit the exhaust port holes are different.
Where is the reverse light switch on a 1999 Hyundai wagon with a 5 speed manual transmission?
On the left side of the trans.
1999 jeep grand Cherokee fault code p0720 book says it uses abs rear wheel sensors not one on the transmission how do you test the abs sensors?
Bring to a shop that has an ABS Scanner
Where is the starter motor located in a 1999 Hyundai excel?
under the manifold, left side of the motor. 2 bolts is all you need to undo it. You may have to take some hoses off to get to it
What would cause the check engine light to be on and the catalytic converter to glow on a 1999 2.4L Hyundai Sonata?
I DONT KNOW FOR SURE BUT I DO KNOW THAT IF YOU DONT GET THE CAR REPAIRED YOU ARE INDANGER OF STARTING THE CAR ON FIRE THE CONVERTOR RUNS NORMAL AT 1500 DEG. WHEN IT GLOWS THERE IS A MAJOE PROBLE WITH THE ENGINE RUNNING TO RICH OR LEAN. PLAESE DRIVE THE CAR TO THE HYUNDAI DEALER NOW!!!!!!!!!!!! sounds like the convertor has colasped internally. Check with the dealer to see if it is still under warranty. On most cars the emissions systems carry a longer warranty than drivetrain parts. Do this now......if the metal is glowing it could spark a fuel line and then there would be a real problem.
How do you replace the starter for 1999 Hyundai elantra?
how to replace the starter for a 1999 Hyundai elantra
How is a timing belt for a 1999 Hyundai elantra?
how to time a 1999 Hyundai elantr glsAnswerhow to set timing belt on Hyundai elantra gls figure
Where is the oil filter on a 1999 Hyundai Elantra?
Front right side
What does turbine sensor A p0717 code mean on Hyundai Elantra 1999?
I believe it is a input speed sensor. Hyundai calls them pulse generators on the 99 elantra.
What is the firing order for a 1999 Hyundai Elantra?
1-3-4-2
How to replace speed sensor 1999 Hyundai elantra?
If the VSS is defective replace the instrument cluster.
How do you find the date of manufacture of a 1999 Hyundai Elantra car?
You can probably find that out from your VIN number.
Where is the heater core in a 1999 Hyundai Elantra?
Its going to be under the dash beside the gas pedal
Where is the starter on a 1999 Hyundai Elantra?
It between the firewall and back of engine, under the overhang portion of the intake manifold.
What would cause a loud grinding noise whenever a 1999 Hyundai elantra is in motion?
most likely the wheel bearings.
Why does the fuse to your power windows keep blowing in your 1999 Hyundai Elantra?
Defective PW motor, short in the wiring or the switch.
Does the 1999 Hyundai Elantra have a warning sound when you leave the headlights on?
no it does not. I have a 99 elantra. It only has the warning sound for leaving the key in and opening the door. I have forgotten my lights on several times because of it.
