The spool pin refers to the metal (or plastic) rib on top of, or on the side of the machine that you stick the spool of thread onto. It is usually about 2 inches long, and about 1/4 inch thick. It holds the spool securely while sewing.
Two. One from the main spool on top, and the other from the bobbin on the inside of the machine.
tension control
theory of sewing machine
Not all sewing machines are compound machines. The definition of a compound machine is one the contains more than one machine within the same case. A machine that is not only a sewing machine but also an embroidery machine would be considered a compound sewing machine. A really good compound sewing machine is the Husqvarna Diamond sewing machine.
sewing machine:) A sewing machine uses thread to fasten fabric together. A sowing machine plants seeds.
Spool pins are used on sewing machines to hold the spool of thread. Most or vertical, some that are horizontal use a spool cap to secure the spool of thread. Some machine come with spool nets to cover the spool to ensure the thread enter the machine evenly. Some machines come with an extra spool pin that fits into a small hole on the top of the machine to hold a second spool of thread.
a spool pin
Parts of the sewing machine in the arm include the spool pin, thread guide, tension disc, take up lever, needle bar, and Bobbin case.Parts of the sewing machine in the arm is; Free Arm-Removable part that allows you to sew in small areas easier.
Parts of the sewing machine in the arm include the spool pin, thread guide, tension disc, take up lever, needle bar, and Bobbin case.Parts of the sewing machine in the arm is; Free Arm-Removable part that allows you to sew in small areas easier.
Sorry, I have no idea where you are, to suggest any place for you. But there are times when I need to hold a large 'cone' of thread at my sewing machine. Put the cone of thread in a large container, and running the thread through the 'eye' of a safety pin ( that you would tape to the sewing machine ) and run the thread past the stem where a spool of thread would normally sit, then thread the machine as usual. It works very well. I hope this is helpful for you.
Two. One from the main spool on top, and the other from the bobbin on the inside of the machine.
A sewing bobbin is a small spool of thread that goes underneath the needle and sewing platform. It provides the lower thread for the sewing machine. Different models of machines use different bobbins, but most machines require you to create the bobbin yourself.If you'd like to see a picture of a typical sewing machine bobbin, visit the "related link" below.If you look at a diagram of the way a sewing machine works, you can see that when the needle goes down to the bobbin, the bobbin thread is pushed around the upper thread, and that is how the two pieces of fabric are joined together.The upper thread goes along the top of the seam, and the bobbin thread goes along the bottom of the seam.
I was having the same problem this helped............http://www.blurtit.com/q372329.html
This question is rather vague. In the 1960's Singer came out with a Touch and Sew sewing machine that had a set of plastic cams. They were disks that fit into a spool at the top of the machine. Each disc made the machine perform stitches differently.
a spoolcase is something that you use in sewing or when you sew you put the spool into a spoolcase but you must make sure the spool is filled up with thread then you can start sewing only if you have a long piece of thread in the spool!!
The thread moves from the spool through the needle to make stitches on a sewing machine. The thread take-up lever is what feeds the thread from the spool to the needle as it moves up and down.
I need to find out a better more descriptive or video on threading a Montgomery Ward Model 30 Streamliner sewing machine.