It should be on the upper left side of the firewall. There is typically a single vacuum line running to it, along with one electrical connection. Most Mazda EGR boost sensors are made by Hitachi, so if it is the original boost senor, it should say Hitachi on it somewhere. If you follow the EGR lines around, you should find it eventually. By the way, EGR boost senor issues are a common problem on all Mazda's made around this time and a dealer should know how to fix it.
do you know what it looks like you can go to www.autozone.com and look at it
The 1999 Chevrolet Suburban speed sensor is located on the back of the transmission. The speed sensor will be in the upper left-hand corner.
A computer diagnostic test will show a timing belt problem for a 1999 Mazda 626. If there is a problem with the belt, diagnostics will determine if it needs to be repaired or replaced.
nnnn
HOW DO YOU REMOVE AND INSTALL A SPEEDOMETER SENSOR IN A 2001 FOR ESCORT ZX2,AUTO.
99 mazda b3000 where is the speed sensor located
There is no MAP sensor on a 1999-2000 Mazda Miatas. There is a boost sensor that assists with controlling the EGR Valve solenoid and a few other features, and is located on the passenger side on the lower part of the intake manifold, and says "Boost Sensor" on it. The primary sensor for monitoring incoming air and fueling is done by the Mass Air Flow sensor (MAF), not MAP (like Hondas). This is located on top of the stock air box and is a black, cylindrical tube about 6" long.
1999-2005 Mazda Miatas do not really run MAP sensors like Hondas, they use a Mass Air Flow Sensor, the black, tubular piece on top of the air box. Miatas do have a boost sensor, and that is located on the intake manifold, half way down on on the lower section.
The speed sensor is located on the rear axle housing.
were is my 1999 pontiac grand am map sensor location
on the tranny
in the intake manfold
Type your answer here... where in height sensor location on 1999 cad deville
Bad O2 sensor-no activity detected.
you needs a dpfe sensor
Inside the door under the latch.
The 1999 Mazda Millenia OBD 2 port is on lower right corner of dash; next to tunnel