answersLogoWhite

0

When preparing wooden gates for painting, it is best to first look over the gates for any imperfections. If there are broken pieces, weathered areas, rough patches, it is best to sand them down, wipe off any crud, and repair the broken sections. Then, treat the gates with a wood treatment. After letting the treatment set, it is time to prime and paint the gate.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

Can a rough surface cement use neutralizer before painting?

If it's alkali then you'd have to use a neutralizer, like water, ammonia or baking soda, prior to painting. The pH of the surface has to be below 10 prior to painting.


Can you paint oil over water paint?

Yes, you can paint oil paint over sound water based paint easily, just be sure to degloss and clean the surface prior to painting.


Can you spray clear lacquer on a nickel wash basin to prevent oxydation?

I would venture to say yes, as long as the nickel non porous surface is grease free.... wipe clean with alcohol and a clean dry cloth prior to painting, always try it in an inconspicuous spot first before getting too busy and painting the whole thing.


Prior to gates the standard for probable cause could be best described as?

a fair and probability


What time do the gates open at Wrigley Field?

Two hours prior to first pitch.


What time do gates open at wrigley field?

Two hours prior to first pitch.


How can you fix a wooden chopping block starting to crack up one side and across the top?

When you notice a split in a wooden chopping block, take action quickly, as delaying will increase the issue. You will need Titebond adhesive (food safe) and clamps. Be sure the wood is dry and clean of any foodstuffs. Glue and clamp and allow to cure. Prior to use clean very well and condition.


Will you be clean from THC when drinking herbal clean twenty-four hours prior?

No. Follow the directions on the bottle. You're supposed to take the drink just a few hours prior to the test. Taking it 24 hours prior won't work.


What is a wooden float?

A Wooden float is the flat surfaced tool that is used for smoothing the surface of concrete prior to it setting. A wooden float produces a reasonably non slip surface as it pulls up sand out of the concrete mix to the surface.


How do you check cleanliness and condition of table prior service?

You check how clean it is.


Three forms generally accepted as art prior to 1900?

Painting, drawing, sculpture, engraving.


Is it necessary to power wash and use a primer before painting a house?

It's recommended to bleach and power wash prior to painting the exterior of a home. A primer/sealer should be used on any bare wood or masonry and on any chalky surface however if the surface is clean and sound, a good quality paint should adhere without a problem.