0
8 x 8.5, same as Chevys and Rams 2500
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
1976 Ford F 250 4 X 4 with a 390 4 barrel. Will a 428 or 427 bolt in to the same bell housing and engine mounts?
Yes. The 352, 360, 390, 406, 410, 427, and 428 are all FE's and are based on the same engine block. I have a 76 F250 4x4 highboy with a 390 and my brother has one with a 428. The engine mounts are the same and the 428(also 427) will bolt directly to your transmission (NP435 or C6). If you have or are building a 428, remember this engine is externally balanced (the 390 is internally balanced) so the flywheel (if manual trans flexplate if auto) needs to be balanced with the rotating assembly.
Gear ratio 1988 Chevy k 1500?
Is a rear end in a 88 4x4 Chevy truck the same as the front in gears of a 93 Chevy 4x4
How do you get the C Clip off the rear Axle to remove the carrier bearing on a 1998 C1500 Chevy 4x4?
If you look at the carrier you will see a big pin that goe's through the spider gears and carrier. Turn the carrier around until you see a small bolt on the right side of it. Remove the bolt that is what holds the pin in the carrier. Then pull the pin out towards you. Then push the axel's in and the c-clips will fall out. Then put pin back in so the spider gears don't fall out.
What is the towing capacity of a 97 4.2 Nissan hardbody truck?
3500 pounds is the official weight straight form the manual for a 4x4. I pull 2k in my 96 4x4 ka24e and while it CAN do it, it's not happy lol
Does a 1987 Chevy half ton 4x4 have a shifter for 4wd or a pushbutton?
shifter
Will rims off 2001 ford f250 4x4 fit on a 1990 ford f250 4x4?
no. the bolt pattern was changed
What is the wheel Bolt pattern and size of a 1995 F250 4x4?
8x165
Bolt pattern for 1976 ford f250 4x4?
8 lugs at 6.5 inch spacing
What is the wheel bolt pattern for a 2001 ford F250 super duty 4x4?
Diesel - 8 X 160mm
What is the bolt pattern on a 1984 Chevy Blazer 4x4?
The bolt pattern on a 1969-1991 K-5 Blazer is 6 on 5.5" (139.7mm).
What is the bolt pattern on a 1984 GMC sierra 4x4?
K1500 is 6-139.7mm/6-5.5"
What is the Wheel pattern on 1996 f250 4x4?
Your Mother.
What is the bolt pattern on a 2000 ford expedition 4x4?
Bolt pattern is 5x135
What is the stock tire size for a 1975 F250 custom 4X4?
The stock tire size for a 4-wheel drive 1975 F250 is 235/75-15, 235 x 733 mm. The bolt pattern is 5x5.5, and the the offset range is -20 to 2.
1997 Ford Expedition XLT 4x4 bolt pattern?
Bolt Pattern: 5-135
What is the bolt pattern for an 1988 dodge ramcharger 4x4?
The bolt pattern is 5 on 5.5 inch.
What type of motor oil to use on a 1984 F250 diesel 4x4 standard transmission?
15 40 rotella
