A filament radiates black-body radiation, with a range of wavelengths and colours. The intensity peaks at a wavelength that depends on the temperature. As the bulb is dimmed the peak radiation occurs at longer wavelengths and the colour goes from white to brown.
Bulb's filament are wounded into a coil.
A fused bulb does not glow because the filament of a fused bulb is broken. Since current can't flow through the filament, it can't get hot enough to glow.
As the name implies, support wires support the filament wire in the bulb, The filament, of course is the wire that glows white hot, giving out light
Glass is the insulator in a light bulb. The base has a heavy piece of glass to separate the ring from the center, and there is a glass support inside the bulb to hold up the filament and separate the wires going to the filament.
a filament
In a lamp you can have three settings with two filaments. One filament is for dim. When it is on, the bulb is dim. One filament is medium. When only it is on, the light is medium. When both filaments are on, the bulb is bright. In auto and motorcycle applications headlamps can have 2 filaments. A 'dip' beam and a 'High' or 'Main' beam. When the High Beam is on the Dip is off and vice versa.
filament of bulb
Mains filament
The filament is the small coil that glows when the bulb is on. I believe its made out of tungsten
Bulb's filament are wounded into a coil.
Mains filament
A light bulb that uses a filament is also known as an incandescent light bulb.
Higher input current means higher voltage. A bulb contains one filament (tungsten) when input power supply passing through this filament, the filament gets hot and makes a red color and then yellow. This filament needs only electrons flow, but if we are operating higher current bulb efficiency will down, when the filament burns out.
A low resistance bulb has a thicker filament.
filament
No...
Fused bulb