Blocks with the 010 casting number have a higher nickel content and are more desirable for performance applications.
It will be back by the fire wall on the left rear side of the engine, towards the back side of the valve cover.
fuse number 49 under the hood
I also have a equinox with a key that does not work properly hard to turn difficult to get out. my dealer Tec is stubbornly maintaining it all in the tumblers. But I maintain thats it is in the electrical some where between the shifter and the key cylinder. I will also hang in stubbornly till it is fixed and then tell you what is wrong and how to fix it. Where are the GM engineers in all this
There is a resistor located in the blower housing. It may be under the dash on the left(passenger) side. It will have two screws holding it in and have three or four wires plugged into it.
If your Chevy 350 marine engine misses at high speed, you might have an issue with the timing. This can be adjusted. You also may have an issue with the fuel filter or injectors. Spark plugs can do that also.
Z-71 has different shocks and a couple more skid plates over the standard Chev 4 x4.
BODY STYLE i WOULD SAY IS THE MAJOR DIFFERENCE
No.
clockwise
lt and slt are interior trim level designations. both are the same, lt is used by chev, slt is used on gmc.
4L60E
If its a small block it's endless. Small block parts interchange alot.
replace the engine with a small block chev
Where is heater core located on 92 chev
No, because the small block Chev fits so well
blown Head gasket/warped heads/cracked block
If it has points then it is .019, You must be working on something old.