0
There is no predicate noun (also called a subject complement) in the sentence, "The electrician installed the light fixture?"
A predicate noun is a noun or a pronoun that follows a linking verb, restating or renaming the subject.
Example: The electrician is my brother. (electrician = brother)
What else can I help you with?
What changes are to be made for a fluorescent lamp circuit to work if ac supply is replaced by dc?
A fluorescent light fixture is designed to operate on an AC voltage supply. To have the fixture operate off of a DC supply a power inverter would have to be installed. The power inverter would then change the DC to AC for the fixture to operate. These power inverters are reasonably priced these days and can be bought at most DIY stores.
Is a fluorescent light grounded?
If you are talking about the lamp then the answer is no. If you are talking about the fluorescent fixture, it should be. It is the fixture grounding that helps the tube to ignite. because of the close proximity to the metal of the fixture. There are many occasions when the fixture will not operate, but as soon as the ground is connected the fixture operates fine.
Can you put a black light bulb in any fluorescent fixture?
Yes a black lamp tube will work in a fluorescent fixture. Guess you don't remember the early 70's.
Who is responsible for light fixture landlord or tenant?
In side the rental unit if an apartment the tenant, Outside the community If a home or Single family the tenant
How much is the light voltage in confined space?
The voltage can be any voltage that you like or what is available. It is the specifications of the light fixture that defines whether it is suitable to be used in a confined space. One has to know what the environment is in the confined space before a light fixture can be chosen. The environmental conditions can be any one of a number of conditions including explosive gases. With explosive gases present, the wiring and devices within the space must all be explosion proof equipment.
How do you make a light fixture to hang over your billiard table?
Call an electrician
Before replacing a burned out lamp in an installed light fixture?
isolation
How can I convert a light fixture to an outlet?
To convert a light fixture to an outlet, you will need to disconnect the wires from the light fixture and connect them to an outlet instead. This may require some electrical knowledge and tools. It is recommended to consult a professional electrician for safety and proper installation.
How can I switch the light fixtures in my bathroom?
Switching a light fixture requires the following steps. First, remove the old fixture. Second, you must disconnect the wiring. Third, a junction box must be installed. Finally, a new fixture must be installed. Detailed instructions can be found here: http://www.diynetwork.com/how-to/replace-a-bathroom-light-fixture/index.html
How can I add a light fixture to the ceiling?
To add a light fixture to the ceiling, follow these steps: Turn off the power to the room at the circuit breaker. Choose a suitable location for the fixture and mark where it will be installed. Install a ceiling electrical box at the marked location. Connect the wires from the fixture to the electrical box, following the manufacturer's instructions. Secure the fixture to the ceiling according to the provided mounting instructions. Turn the power back on and test the light to ensure it is working properly. If you are unsure or uncomfortable with any step, consider hiring a professional electrician for assistance.
How can I wire an outlet from a light fixture?
To wire an outlet from a light fixture, you will need to connect the outlet to the wiring of the light fixture. This involves running a new wire from the light fixture to the outlet, making sure to follow proper electrical safety procedures and regulations. It is recommended to consult a licensed electrician for assistance to ensure the job is done correctly and safely.
Can you install a dimmer switch on any light fixture?
No, you cannot install a dimmer switch on any light fixture. The fixture must be compatible with a dimmer switch and the switch must be rated for the type of light bulb being used. It is recommended to consult a professional electrician for proper installation.
What should I do if the pull chain came out of my light fixture?
If the pull chain came out of your light fixture, you can try to reattach it by opening the fixture and securing the chain back in place. If you are not comfortable doing this yourself, consider contacting a professional electrician to help fix the issue.
How can I install a light fixture in my home?
To install a light fixture in your home, first turn off the power to the area where you will be working. Remove the old fixture, then connect the wires of the new fixture to the corresponding wires in the ceiling. Secure the fixture in place and test it before turning the power back on. If you are unsure, consult a professional electrician for help.
What is the purpose of a ceiling light plate and how is it installed in a room?
The purpose of a ceiling light plate is to cover and secure the electrical connections of a ceiling light fixture. It is installed by attaching it to the ceiling junction box using screws or other fasteners, ensuring the light fixture is safely and securely mounted in place.
What is the purpose of a ceiling light mounting bracket and how is it used in the installation of a ceiling light fixture?
The purpose of a ceiling light mounting bracket is to securely attach a light fixture to the ceiling. It is used by attaching it to the electrical box in the ceiling, then connecting the light fixture to the bracket using screws or other fasteners. This ensures the light fixture is safely and securely installed in place.
How can I install a light fixture without existing wiring?
To install a light fixture without existing wiring, you can use a battery-operated or solar-powered light fixture. These types of fixtures do not require any wiring and can be easily installed by following the manufacturer's instructions.
