answersLogoWhite

0

the intake pushrods are shorter of the 2, all intake valves you can see with the intake off those pushrods go there, the rest are exhaust pushrods install in remaining holes

User Avatar

Wiki User

15y ago

What else can I help you with?

Continue Learning about Art & Architecture

No compression on 3100 motor just changed the intake gasketthe car is a lumina?

The intake and exhaust pushrods are different lengths. If you mix them up you can cause bent valves upon the first crank which would cause a no compression condition.


Why won't a 1996 Olds Cutlass Supreme 3100 start after having a tuneup and changing the coil packs?

You probably got the firing order mixed up. You may want to go to a car parts store, or book store, and get a repair manual for your car. They cost about $16.00 Or, go to a Public Library.


What are the torgue specs on rocker arms on a 2001 malibu 3100?

All of the torque specifications for vehicles can be found in Haynes Repair Manuals available at most auto parts stores.


Why would gm 3100 engine have no spark?

There could be many reasons why the engine has no spark. A few reasons could be that the starter or starter solenoid is going bad, or the battery is drained.


Is a 3300 V6 engine a good choice for a 1994 Pontiac Grand AM?

if you are looking to do an engine swap,it is a bad choice, the 3300 is from the 92-93 grand am and does not directly fit. the 3300 is a 90 degree V6 engine like the 3800,you are much better to go with the 3100 that is standard in any V6 grand am from 1994 till 1998. The 3100 is a 60 degree V6, as is the 3.4 engine in the more modern grand am. Even the 3400 could be a difficult job,if you are very mechanically inclined you could do a 3300 swap yourself, but i am told that it is about 100 hours labour to put the 3800 into a grand am and the 3300 would be a very similar job.