Mitchell 1 OnDemand5 service manual recommends, from GM's service information, to tighten the drive axle nut to 140 N.m (103 Ft. Lbs.).
The 1998 GMC Jimmy front axle shaft torque specification is 60 pounds. You want to make sure that you do not over torque the axle shaft, as you can ruin the axle bearing.
The rear hub nut torque settings on a Renault Clio should be set at 175Nm this is what holds the disc in place.
Torque specs for 2006 F-150 (2 wheel drive) spindle nut is 295 ft lbs. This is according to Ford's specs.
The rear axle hub nut should be torqued to 260Nm or 192 lb/ft - this applies also to the front axle hub nut.
'97 sunfire axle nut is 195 ft-lbs. Should be the same for Saturn
what is the Torque spec for rear axle hub nut on a 2002 ford explorer
nobody knows!
175 foot pounds
Use a new nut from the dealer and they will give you torque specs for your car..you will need the VIN number for the dealer.
77 ftlb according to the 2002 Camry Owners' Manual
Read your owner's manual. 203 lb-ft
Torque to 30lb-ft then rotate approx. 280 deg. not sure what the final torque will be, and it varies, but it will be very tight.
180lbs per the spec
What is the wheel nut torque spec for 777 g
spec calls for 185 foot pounds of torque, with a new nut.
The torque spec is at 95 ft/lbs. Per cycle center of denton.
Proper lug nut torque spec for 2007 Honda Odyssey