So, it still has the old thermostat right? Maybe it needs a new one or maybe it got put in upside down. It's easy to do.
Drain the water from your radiator. Remove the radiator hose, from the thermostat housing. Remove the thermostat housing retaining bolts. Replace the thermostat housing gasket and reverse the process to install the new thermostat.
Drain the water from the cooling system. Remove the radiator hose from the thermostat housing. Remove the thermostat housing retaining bolts. Reverse the process to install the new thermostat.
You should have the 5.2 engine with your Limited, but some have been ordered with the 4.0. The Thermostat is located on the front of the engine at the end of the Radiator hose. It is between the Alternator, and the A/C Compressor. You might find it easier to remove the Alternator to get to the 2 bolts that hold in the Thermostat Housing. remove them, clean the housing and the surface it sits on, install a new gasket and thermostat and put back anything else you may have taken apart.
go to a mechanic
Be sure it is installed correctly and/or change brands.
To change the thermostat in this Lexus model, follow the upper radiator hose to the aluminum housing--the thermostat is located in that housing.
Remove the 2 bolts at the thermostat housing. The upper hose goes to the thermostat housing.
The thermostat on a 94 Kia Sephia is located in the thermostat housing which is clamped to the radiator hose. To change it, remove the boltsÊon the thermostat housing, pull the thermostat out and replace a worn gasket. Ê
Remove the water supply hose from the thermostat housing. Remove the thermostat housing retaining bolts. The thermostat will lift out. Reverse the process to install the new thermostat.
One can change the thermostat on a Chevy car by draining the coolant and disconnecting the upper radiator hose. The thermostat housing is then unbolted, the old thermostat removed, and a new unit placed in the housing.
Drain the radiator. The thermostat is in a housing connected to the water pump. Remove the housing to replace the thermostat and gasket.
Drain the water from your radiator. Remove the radiator hose, from the thermostat housing. Remove the thermostat housing retaining bolts. Replace the thermostat housing gasket and reverse the process to install the new thermostat.
The thermostat is under the housing that the top radiator hose connects to, remove the hose then the housing and change the thermostat. The bolts are metric so be prepared with the proper tools.
Remove the water supply hose from the top of your thermostat housing. Remove the thermostat housing retaining bolts. Lift the old thermostat out and drop in the new thermostat.
Remove the water supply hose from your Chevy Equinox thermostat housing. Remove the thermostat housing retaining bolts. Lift the old thermostat out and drop in the new thermostat.
The thermostat housing is where the lower radiator hose attaches to the engine. remove the hose and the housing (2 bolts) and the thermostat is in there (it may come out with the housing)
Begin by removing the water supply hose to the top of the thermostat housing. Remove the thermostat housing retaining bolts. Lift the thermostat out and drop in the new thermostat.