- I would use 100% clear silicone. - However there is now a process where a properly equipped store can transfer a photo permanently onto glass (almost like etching) I would inquire among poster and art stores in your neighborhood.
Elmer's Glass glue would work, but I'd recommend taping the back too.
Just add as much glue to the paint as necessary. The glue will change the opaque-ness of the colour.
PL200, or any epoxy.
No, clay is too porous for a cyanoacrylate glue. -Elmers does make a China and Glass glue that may be good for clay.
Use a glue gun. The glue will peel off fairly easily when you are ready to remove it.
superglue
Pressing it on with hot wax is the only way.
Epoxy.
Yes
I had to do this recently when the glass came out of the track. First remove the trim panel and carefully lift out the glass. Then remove the two attachment pieces from the sissor arm. After taking careful measurements use some Goop or other glue to attach the two pieces to the glass. After the glue dries you can then carefully reinsert the glass into the door and attach it to the sissor. I waited a couple of days before operating the window to make sure the glue was dry. .
Attach it with a glue
Yes, super glue is excellent for glass.
Epoxy is best for gluing glass to wood.
Elmer's China and Glass glue.
Yes, J B Weld will glue to glass
Super glue can.
E6000 glue works best :) You can also glue a small wooden circle or felt circle inside using the e6000 glue and then attach to the hair bow with regular hot glue :)