http://www.a1electric.com/grandam.htm here is an excellent how to with pictures
Galaxie (Ford)Gardner Roadster (Gardner Motor Car Company)Geo (Chevrolet)GMCGolf (VW)Grand Am (Pontiac)Grand Cherokee (Jeep)Grand Marquis (Mercury)Grand Prix (Pontiac)Gremlin (American Motors)GTO (Pontiac)GTX (Plymouth)
The flex plate is bolted to the back of the crankshaft. It connects the motor to the torque converter in the transmission. To replace you remove the transmission and replace it.
on passenger side near rear of motor. Here's a writeup. http://hubpages.com/hub/Starter-Removal-1999-Pontiac-Grand-Prix
Like a cylinder with a smaller cylinder on to of it. It will be sittind sideways
The 1993 Pontiac Grand Am for cylinder engine has four motor mounts. There is a motor mount on each corner of the engine.
yes as long as the grand am is a 2.4 twin cam also
where can you find a diagram of 1994 pontiac grand am motor?
where is the location wiper motor Pontiac grand prix 2002
Dependes on the motor but the four cylinder will hold a little over 2 gallons
it's under the throttle body ,(air intake) on right side(back of the motor)pully and belts is on the leftside(front of motor)1999 grand am 3.4 sfi.
no way dif motor monts
yes the motor will fit in the car chassis but u might have to change all the wiring harness's because i am pretty sure that, that motor is a 24 valve...but if a 16 valve came out of the 95 and ur putting a 16 valve into the 95 u shouldn't have to change the wiring harnesss
yes it should bolt right up as well as the original motor and tranny
Banda del motor
in the motor
Yes