If using oil-based paints then most definitely.I would use minimum 240 grit in between coats and fully wipe down.If using water -based paints I would also,though paint manufacturers don't press this point.
The first step in painting a face white is to use a primer on the wood. Painting the fence will require several coats which should be applied evenly to ensure a good finish.
If you used the right paint, Bathroom paint, 2 top coats, over primmer,over greenboard primmer, over greenboard or paperless drywall, then no.
I think the average is about two hours, but that may vary by your climate, the type of paint used, etc. This website goes into some detail about EVERYTHING you ever wanted to know about painting, I hope it's helpful. Good luck! http://www.housepaintingtutorials.com/interior-paint-finishes.html
Not enough info. It depends on the size of the panel and the coverage of the paint.
I'd say around 6m squared. Though it really depends what you're painting onto, and how many coats!
The first step in painting a face white is to use a primer on the wood. Painting the fence will require several coats which should be applied evenly to ensure a good finish.
the maroons of course i as a Jamaican should know that
The benefits of primer is to solve common painting problems including stains on walls, moisture damage, old painted surfaces, odours, colour changes, and new exterior woods. Only two coats of primer should apply on the wall before painting is to be done. It is usually acceptable to use one coat of primer.
no you do not sand when using acrylic, nor should you have to clearcoat.
I think people should not wear fur coats, because the kill animals to do the real fur coats.
If you used the right paint, Bathroom paint, 2 top coats, over primmer,over greenboard primmer, over greenboard or paperless drywall, then no.
Yes, definitely. You have to sand and then fill at least twice in most cases.
When Painting One's Fingernails, Applying Two Coats Is Necessary. the Coats Are a Base Coat and a Top Coat. This Is to Ensure Colour Suitability and Stability. Both Coats Ensure a Longer Lasting Nail Colour.
Some great oil painting techniques to use on a wooden canvas include priming the canvas with gesso, and sanding between coats. You can also cut the canvas into different shapes.
roughly $4 per sq...sanding if needed, caulk, 2 coats siding and 2 coats trim paint...including materials. NC area
fur coats are used to cover yourself from cold
the red coats were british and fought against america