soon if the idiots dont do something about it.
distemper
They should have a 'Teak Oil' that you can use to finish the furniture
yes Yes, an oil paint will adhere to latex. It doesn't work in reverse, latex will not adhere to oil that is dry, but oil adheres to dry latex. If you were a purist, though, you would sand down the woodwork before repainting it. That would give the best result.
No. You can use lacquer on oil too. Varnish will work well with oil stain as do any of the wax finishes
Plain Lindseed Oil makes a fine finish for just about any wood. It is cheap, easy to apply, but should probably be applied yearly depending upon weathering. You can mix it with a bit of motor oil to darken the stain.
Teak oil and teak oil finish is the same thing. Teak oil is generally linseed oil, or it can also be tung oil.
You rub oil into it.
A fairly tough, resilient finish.
Yes, you can apply polyurethane over Danish oil for a protective finish.
everyone will die
Minwax Tung Oil Finish typically takes about 24 hours to dry completely.
No, it is not recommended to apply polyurethane over boiled linseed oil for a protective finish.
Yes, linseed oil dries completely when used as a finish for wood projects.
No, it is not recommended to apply polyurethane over mineral oil for a protective finish on wood surfaces. Mineral oil can prevent the polyurethane from properly adhering to the wood, leading to a compromised finish. It is best to use a compatible wood finish for optimal results.
distemper
Absolutely, the parkarized finish helps hold the oil. If you don't apply oil it will eventually rust. I usually spray the finish with CLP (you can buy at Walmart in the gun section). Let it dry overnight and wipe off the excess.
An oil finish penetrates the wood to enhance its natural color and grain, while a wax finish sits on the surface to provide a protective layer and a soft sheen. Oil finishes are more durable and water-resistant, while wax finishes are easier to apply and maintain.