One can purchase good quality floor paint at paint specialty stores like Sherwin-Williams, Benjamin Moore, and Dunn-Edwards. One can also find good quality floor paint at Home Depot.
There is a product called Goof that does a pretty good job. Assuming the paint is fresh, if you are quick about cleaning the Goof off, it shouldn't lift the finish on the floor. Depending on the finish on the floor and how long the paint has been there, you might be able to scrape or peel it off with a fingernail.
You can paint over your old primer, just make sure to clean your wall with TSP. And for your second question, to paint over your concrete wall you wanna make sure it's primed to seal all the pores in the concrete.
The cheapest paint for basement floor paint can be found at Home Depot. The average cost for one the will seal your basement floor from water damage is about $58. You can shop around at different stores to see where will give you the cheapest price for the amount that you need.
Most manufacturers of concrete stains recommend that one waits approximately 90 days after the concrete is poured. Check the instructions on the can of stain and follow the instructions and time frames accordingly.
Buy a new one
Rustoleum's concrete paint is made from acrylic and can be applied with only one coat. It is hot tire and chemical resistant as well as UV resistant.
Home Depot would be a great place ti buy epoxy floor paint, since they are one of the leading companies in home refurbishment. If they don't have it, try searching online.
Epoxy floor paint can be used in various settings, such as residential garages, warehouses, commercial kitchens, and industrial facilities. It provides a durable, protective, and easy-to-clean surface that is resistant to chemicals, stains, and abrasions. Epoxy floor paint is also popular for automotive shops, showrooms, and healthcare facilities due to its seamless and hygienic properties.
I spoke to the one paint dealer I have confidence in and was told yes I can do exactly that i.e. put a latex (not sure about alkyd) two part epoxy coating over my concrete latex floor paint. First I sanded the surface to get a better bond and my next move is to clean the floor. As a suggestion be sure you have a concrete paint on the floor. If not you could have other problems which I encountered originally i.e. paint not adherring to the concrete in the presence of water. USE ARMORGUARD EPOXY FLOOR COATING, It will last forever, its 100% Solid, No fillers, ODORLESS and NON TOXIC, Its also made with MICROBAN to prevent mold, mildew or algae, look on www.ecosmartepoxysystems.com for more information
Radiant flooring is an option if one has an existing concrete floor. The radiant flooring system is installed underneath the concrete floor to heat the concrete.
there are a lot of comparisons regarding concrete floor finishes that you can find online here is one example http://www.concretenetwork.com/concrete/polishing/ there you could a lot of floor concrete that you can compare to other.
No one likes his or her concrete floor to look like a dull, boring, gray floor. There are many things you can do with a concrete floor - you can install tile on top of it, you can carpet it, or you can paint it. All of these things can create many undesired issues, however. If you install carpet on your concrete floor and there happens to be any flood or water damage issues going on, eventually you will have mold growing underneath your carpet. So, as you can see, this option can create a definite health hazard. If you place tile on a concrete floor, there is always the chance that the tile won’t adhere to the concrete particularly well. Plus, if you ever decide to pull the tile up from the floor, the adhesive that is underneath the tile will be particularly hard to remove. Painting is another option, but paint can chip and wear quite easily if your concrete floor has heavy foot traffic on it. The best option, by far, is concrete staining for your concrete floor. Concrete staining does not have to be any more expensive, nor any more difficult than other methods of improving upon a concrete floor. Some people may choose to hire professionals to do such a staining project, while others want to attempt to complete the project themselves. You do not necessarily have to have experience to complete such a project, but you need a ton of patience to finish the floor. It may be worth it to you to have a professional stain the floor if you feel that you do not have the time or patience to complete the project. However, it is obviously going to be much cheaper to complete the concrete staining yourself. Overall, concrete staining can give your basement or other concrete floor a very elegant and finished look. It may be the best option you have when it comes to improving upon your concrete floor. Now is the time to choose the particular stain that you want for your floor. You can pick different stains, depending on how you want your floor to look.
Garage floor paint is a simple coating that provides a basic level of protection and can be easily applied. Epoxy, on the other hand, is a more durable and long-lasting option that forms a stronger bond with the concrete surface. Epoxy is generally more suitable for long-lasting protection and durability compared to garage floor paint.
There are many places where one can buy floor cabinets. One can buy floor cabinets from popular on the web sources such as The Home Depot, Walmart, and Lowe's.
The best application techniques for concrete floor paint to ensure a durable and long-lasting finish include properly cleaning and preparing the surface, applying a primer specifically designed for concrete, using a high-quality paint suitable for floors, applying multiple thin coats rather than one thick coat, and allowing each coat to fully dry before applying the next. Additionally, using a roller or sprayer for application can help achieve a smooth and even finish.
Coating your garage floor with epoxy seal paint will provide you with the best clear finish. For a better finish, coat your garage floor multiple times.
that is a hard one. You will probly need a hole in the concrete with a drill or something. Or dynimite.