back side of the engine block about half way up
A person can print off the firing order for a 1999 Oldsmobile Alero at the library. They can also get a print off at an auto part store or an auto shop.
I don't think you can bypass them.
The master cylinder on a 1999 suburban is pretty easy to change. Under the dash, disconnect the clutch pedal from the cylinder rod. disconnect the brake lines from the master cylinder and allow to drain into a container. Unbolt the cylinder and remove. Install the new cylinder and connect the lines and rod back up. Add new fluid, and bleed the slave cylinder to finish the installation.
You can't bypass or reset security system, bring it to the dealer.
no egr valve on 1999 to 2001 2.4 alero
next to the 5th
I don't know either!!!
Drivers side, mounted on the firewall, behind the master cylinder. Coming from that booster is a large vacuum line.
In the 2000 Alero, it is fuse 34 in the engine fuse box, which is located near the battery. You can check the same fuse for the 1999 Alero and see if that is it.
At the lower end of the engine Behind the radiator (4 cylinder) At the rear (6 cylinder)
THERE IS NOT ONE.
1999 is right under the fuel tank aft of a black box. Removing the old one is another issue... I am looking for the answer.
it has a type of powerful transmission maybe regular
The oil pressure sending unit on a 1999 inline six cylinder is located on the engine block very close to the oil filter. It is constructed of plastic and metal, screws into the block and has a two wire lead plugged into it.
what dose a 1999 Alero transmission look like.
1999 Alero how do i test ignition coil pack