answersLogoWhite

0

under the dash left hand or drivers side behand the emergency brake pedal

User Avatar

Wiki User

18y ago

What else can I help you with?

Related Questions

2000 kia sportage ignition switch What could be the problem?

Will ignition switch stop oxygen sensor fuse and fuel pump fuse in panel box from not having fire?


How do you change the fuses in a 1961 Ford Falcon?

There is a fuse box connected to the headlight switch which you can either access from underneath or by removing the instrument panel. The fuse box is connected to the headlight switch by a metal clip with a small retaining screw or pin. The fuse box uses only 4 fuses so you can easily replace them without removing the box from the headlight switch.


How do you get the hot wire to your ignition switch on 1971 mustang?

To access the hot wire for the ignition switch on a 1971 Mustang, first, ensure the battery is disconnected for safety. Then, remove the steering column cover to expose the ignition switch wiring. The hot wire is typically a red or yellow wire connected to the ignition switch; you can trace it from the battery or fuse box to the ignition switch. Once located, you can test it with a multimeter to confirm it is receiving power.


What does IGN mean in fuse box?

Oh, dude, IGN in a fuse box stands for "ignition." It's like the key to starting your car, but for your electrical system. So, if you blow that fuse, you might be stuck with a dead engine... or worse, no radio!


Where is the ignition switch fuse on Peugeot partner?

The ignition switch fuse on a Peugeot Partner is typically located in the fuse box under the dashboard on the driver's side. You may also find a fuse box in the engine compartment, depending on the model year. To locate the specific fuse for the ignition switch, refer to the owner's manual, which provides a diagram and details for the fuse layout. Always ensure the vehicle is off and the key is removed before checking or replacing any fuses.


When installing a CD player in a 1992 Grand Prix SE if the ignition wire isn't working is there a fuse for this and where does this wire lead to?

yes there is a fuse in the fuse box. the wire will lead to it or to the ignition switch. But the fuse to amke the hot wire hot is in the under dash mounted fuse box.


Why the ignition fuse burn when trying to start?

The ignition fuse may burn out when trying to start the vehicle due to an electrical overload or short circuit in the ignition system. This could be caused by faulty wiring, a malfunctioning ignition switch, or issues with connected components like the starter or ignition coil. Additionally, if there are any foreign objects or corrosion in the fuse box, it can lead to excessive current draw, resulting in the fuse blowing. Regular maintenance and inspections can help identify and prevent these issues.


1997 f150 blinking dash lights causing the battery to go dead when the ignition is off clicking sound from fuse-relay box under the hood?

You may have a electrical short in your ignition switch or in your fuse relay box,check to see if any water may have gotten into the fuse box relays.


Where is the ignition relay switch on a 2000 Nissan Frontier?

On a 2000 Nissan Frontier, the ignition relay switch is typically located in the fuse box under the hood, which is on the driver's side. You may also find it in the fuse box inside the cabin, near the driver's side dashboard. To identify the specific relay, consult the fuse box cover diagram or the owner's manual for the exact location and labeling.


Where is the ignition fuse on 2000 polaris 500 sportsman?

The 2000 Polaris 500 Sportsmen ignition fuse is in the fuse box. The fuse box is beneath the drivers seat. The location of the fuse will be listed on the inside fuse box cover.


Where can you tap into ignition circuit for accessory on 2008 Ford super duty?

it'll be in the fuse box. you may need to track it under the dash to the ignition switch of whatever it is.


How do you reset fuse box?

To reset a fuse box, first, ensure that you turn off all appliances and lights connected to the circuits. Next, locate the main switch or breaker in your fuse box and switch it to the "off" position, then back to the "on" position. This will reset the breakers. If a specific circuit is tripped, find the corresponding breaker and switch it off and then back on to restore power.