under hood right side,follow the pos.batt.cable to it ____________________________________________ Starter Relay Test Place transmission in Park. Apply parking brake. Check for battery voltage between starter relay battery terminal and ground. Connect jumper wire on starter relay between battery and ignition terminals. If engine does not crank, connect a second jumper wire to starter relay between ground terminal and good ground and repeat test. If engine cranks in step 3, transmission linkage is misadjusted or neutral safety switch is defective. If engine does not crank in step 3, starter relay is defective.
Check your fuel filter, this may be dirty.
Check the connections to the solenoid and to the starter.
crawl under truck and tap the starter with a hammer crawl under truck and tap the starter with a hammer
It's attached to the starter.
Begin by removing the positive cable from your battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install your new Ford starter.
Location of starter on 89 ford f150
On the Starter
how to replace an oil pan that goes to a ford f150 1993? how much does the pan cost,and can you show a picture of it?
It's located on the side of the starter.
diagram of starter in a 1993 ford probe
Yes.
Instructions are in the box the starter came with or go to the manufacturers web site. Not a fun job unless you've done them before & have access to wiring diagrams
There is no OBDII connector on 1993 F150. Didn't start until 1996 (97 model).
no
What question
check your starter or starter relay.
im looking for a wire diagram for f150 starter i am connecting