0
hardware trouble, that's your motherboard trying to tell you there's an error. when this happens you can either look up the error code or troubleshoot:fiddle with the insides (reseat ram, cards, ide connectors)remove everything that you possibly can from the motherboard(unplug all cards aside from video card, unplug hard drive, CD-ROM drives, DVD-drives, remove any usb/firewire devices that are plugged into PC)swap out parts (this is only really possible if you have spares)remove everything and put it back together
if this is happening and the PC has never worked before it would be likely that some part of the setup was DOA, like the memory, video card, motherboard, or CPU
What else can I help you with?
How do you remove speedbit video accelerator?
to remove speed bit accelerator from my PC
Is this PC good for gaming please answer AMD A Series quad core. A8-5600. Processor speed 3.6GHz. 12GB RAM?
Depends on what kind of video card you have. More ram on your video card and yes, you will have a good pc for gamin
When i play PC games... the video gets choppy. what can I do?
its possible that your game is not good enought for the video games or you need to update your video card and install graphic card files like Direct X
How can you download zoo tycoon 2 poison dart frog?
Walmart in the pc game section. Its usually near the video game section you cant miss it.
How do you lower the graphics for a game on PC?
To lower your graphics go to setting or option, and find video. Then you should be able to find Graphics. Then turn that down. Or lower your graphics card.
You boot your PC and don't hear the usual single beep What should you check first?
WHEN bootING your PC and don't get a beep,What should you check first?
What is the meaning of single beep sound on your PC?
If the computer passes the POST the computer will have a single beep
If a beep sound comes then which device of the PC has problem?
yes
How can a PC with no sound card beep?
A PC without a sound card can beep from the in-built speaker that helps to find out about the faults in a system and produce sounds in programming languages like QBASIC.
How do you turn off the loud beep on a PC?
Unplug the small speaker located in the front of the inside of the PC
What does 3 beep codes on a dell dimension 4100 mean?
If it is 1 beep with a slight pause followed by 2 beeps (A 1-2 code) For Dells this means (No Video Card Detected) The recommended corrective action is to reseat the Video Card. Reseat : Pull it out then Plug it back in Also be sure the PC is turned off before you do this.
When a PC boots indicates that all is well after POST?
one beep
What does a single beep indicate during a POST?
During the POST a single beep indicate normal operation of the PC. hope this will help cathrine mauchi
What is wrong with your PC when you only have power and 1 continuous beep?
The beep is a message from your BIOS. Depending on what your BIOS is, the long continuous beep tells the problem the computer is having. Knowing what BIOS the computer has will help with figuring out the problem.
When a PC boots how many beeps indicates that the PC is operating correctly?
In every computer I've seen, one beep means OK.
What happens during the post process when you turn on a PC?
The post process is the "Power-On Self-Test" during those diagnostics it checks the video card, ram, keyboard, cpu, bios, etc. That's where you hear the beeps come from. The single beep that you usually hear the the test completing successfully. - hopefully you hear a single beep ;)
How can you stop the constant beep on your PC after switching on?
If the computer is emitting a constant tone from the speaker when you turn it on, the computer does not pass diagnostics. If you did something (change or add a component) check that first. Next, check the things most likely to go wrong (connector loose, card loose, etc.). It could also be cause by a dead backup battery - tat's a hearing aid sized battery on the 'mother board'. Good luck As the answer above says, it's a cry for help from your motherboard. The idea to unplug and reseat your memory and exapnsion cards is a good place to start. Be sure to know and use good static electricity control procedures. If you can get to a working PC and access the Web, Google for "pc beep codes". There are many sites which can help you decipher the code pattern. You will need to know the BIOS manufacturer for your motherboard.
