answersLogoWhite

0

Here is a site that explains why quite nicely: Gauge Systems Two of the most common gauge systems are AWG (American Wire Gauge, also known as Browne & Sharpe) and SWG (Imperial Standard Wire Gauge). In both systems, a higher gauge means smaller wire. The AWG system was developed in America to be used for electrical applications, and is still used for non-ferrous wire. (Ferrous means iron-based.) The gauge numbers are based on electrical resistance, which increases as the wire gets thinner. (Picture the electrons flowing through the wire as a bunch of people running down a hallway. If the wire/hallway gets thinner, it slows them down since there's not as much room for them to get through. That's what resistance is.) When the gauge number increases by 3, the higher (thinner) wire will have twice the resistance of the lower (thicker) wire. A general rule of thumb says that when the gauge goes up by 6, the wire diameter is halved. (So, for example, 22g would be roughly half as thick as 16g.) * http://www.mailleartisans.org/articles/articledisplay.cgi?key=10945

User Avatar

Wiki User

16y ago

What else can I help you with?

Continue Learning about Art & Architecture

What does it mean when a 1974 Nova fuel gauge is stuck in the full position?

Either the wire from the gauge to the sender is broken or the sender is bad.


Need to know how to wire a Campbell Hausfeld 5 hp Air Compressors to 220?

30 amp breaker 10 /2 gauge wire


Can you make a fusible link from the alternator to the starter?

A fusable link is exactly like the old fashioned household fuse. You make a fusabling link by cutting the wire and inserting a small length of wire 2 wire sizes smaller (I believe its two, don't quote me.) So if the wire is 12 gauge, put in a small length of 14 gauge. (A 14 gauge wire is small than 12 gauge) Make sure you use stranded insulated wire that is meant for cars and that you use the mechanical connectors with insulation built onto them (usually blue) that you attach to the wire by using a crimping tool. I think the length of the fuse should be about 1 inch to about 1.5 inches. Wrap it with plenty of black electrician's tape. If the fuse does burn out (which you want it to if there is too much current going through the wire) the black tape will protect the wire from shorting out to the body of the car, which cause you real problems.


What causes battery to spark and jumpers to melt?

The current passed through them was too high. Possibly they are cheap cables, (many of them on the market today.) - Cables should be at least 10 gauge wire. Mine are 6. The thicker wire, the better quality your cables are. Anything thinner than 12 gauge is dangerous,.


Can 12- 3 wire be used for 20' jumper cables?

No, you need at least 8 gauge for jumper cables.

Related Questions

Which is thinner wire 50w or 100w?

The 100w wire would be thinner than the 50w wire.Ê When determining wire gauge, the higher the wire gauge number, the thinner the diameter of the wire.Ê


Is 20 gauge iron wire thicker than 21 gauge?

No, the higher gauge means a thinner wire.


Is a 25 gauge smaller than a 22?

UK wire gauge - the higher the number the thinner the wire. So 25 would be thinner than 22.


Which is thinner 24 gauge floral wire or 30 gauge floral wire?

Bigger guage number = smaller diameter wire. 30 guage is thinner


What do wire gauges mean?

A wire gauge is a number that indicates how thick the wire is. A larger gauge number means a thinner wire. Gauge and diameter can be linked by looking up wire tables.


What is thicker 14 gauge or 18 gauge fence wire?

Well I am asnwering this just because the body piercing industry uses AWG (American Wire Gauge) for a standard jewellery gauge. So 14g is thicker than 18g, the higher the number the thinner it is, the lower the number the thicker it is.


What is the relation between gauge and mm in the wires or sheets?

In the context of wire or sheet metal, gauge refers to the thickness of the material. The higher the gauge number, the thinner the material. The relationship between gauge and mm varies depending on the standard being used, as different countries have different gauge systems. For example, in the American Wire Gauge (AWG) system, a lower gauge number corresponds to a thicker wire, while in the Standard Wire Gauge (SWG) system, higher gauges correspond to thicker wires.


How does increasing the wire gauge from awg 22 to awg 26 generally effect resistance?

Increasing the wire gauge from AWG 22 to AWG 26 will increase the wire's resistance because a higher gauge corresponds to a thinner wire. Thinner wires have higher resistance due to increased electrical resistance per unit length. Therefore, a wire with AWG 26 will have higher resistance compared to a wire with AWG 22.


What does AWG 18 stand for?

AWG stands for American Wire Gage (gage is spelt gauge in British English)The larger the gauge number, the thinner the wire.


Which awg wire gauge indicates the smallest wire diameter?

The larger the wire gauge, the smaller the diameter. 12 gauge is bigger than 14 gauge.


What is wire thickness called?

Wire thickness is called gauge. This term refers to the measurement of the wire's diameter or thickness, typically expressed as a numerical value. Thinner wires have higher gauge numbers, while thicker wires have lower gauge numbers.


What is standard wire gauge?

Standard Wire Gauge (SWG) is a system used to measure the diameter of metal wires, particularly in the UK and some other countries. It provides a numerical scale where a lower gauge number indicates a thicker wire, while a higher gauge number indicates a thinner wire. SWG is commonly used in various applications, including electrical wiring and crafting, to ensure consistency and compatibility in wire sizes. The system has been largely replaced by the American Wire Gauge (AWG) in many regions, especially in the United States.