0
Did you first check the fuses for both of these items ? Secondly, I had a similar problem with my headlights (I had no dash lights )so I went to the bone yard and got a headlight switch and replaced it now they work and I have dash lights As for your second problem I an in the middle of trying to solve that mystery myself sorry I could not be more help Wipers might not turn on due to the 4.8 amp curcuit breaker being out, depending on year it is different locations refer to your manual to find location
What else can I help you with?
On a Pt cruiser how do you replace the power window light switch bulb?
The led light in the window switch is not replaceable. It is only serviced with the entire switch.
Brake lights do not work all the time replaced brake light switch?
If you have the same bulb for brake and signal, brake light power needs to be interrupted by the signal lights, The brake circuit has to go through the signal light switch so the problem could be there.
Where is the backup light switch on a 2000 Plymouth neon?
The backup light switch and the brake switch are all in the same relay switch. The backup light switch can be found beneath the drivers side dashboard.
How do hook up driving lights up to a 1997 Dodge Grand Caravan so they are Daytime Running Lights turned on with the ignition?
Hook your ingition power wire from the ingition harness to your head light switch (useally Green in color on GM) and it will solve your problem
Is the power window switch light replaceable on a 2004 gmc envoy?
Yes it is. It is a small F4.8 bulb that is part of the board assembly buried inside the switch module. But I am problems finding the bulb online.
How can I use the power to switch on the light?
To use the power to switch on the light, locate the light switch and flip it to the "on" position.
Can you power a light switch power to switch then to light from a switch beside the one you want hot the switch that you want to take power from has the white as hot switch after light?
I can not understand your question.
2004 dodge ram lights stay on?
The 2004 dodge ram has a system built into the Power Distribution Modual (fuse box under hood), that turns on the head lights when the head light switch fails. This is a safety system in case the switch fail at night. Check and replace head light switch.
How do you replace a head light switch 93 ford explorer?
replace head light switch on 93 ford explorer
What if you put a new head light switch in and you have head lights but no park lights and if you put it between park lights and head lights then you get park lights and no head lights?
You either got a bad new Switch or more likely you have a power supply problem to the park side of the switch.
Where is the light switch on a 1998 ford F350 for the dome light?
turn head light switch till it clicks and theses your dome light switch...
What is the problem on your 95 rodeo if there is power to the brake light switch and switch works but will not light any brake light?
Power is being interrupted; the turn signal switch is a power juction see if the power is flowing thru it.
How can I wire a light switch to a light?
To wire a light switch to a light, you will need to connect the switch to the power source and the light fixture. Turn off the power, remove the cover plate, and disconnect the existing switch. Connect the wires from the switch to the corresponding wires in the wall and the light fixture. Secure the connections with wire nuts and screw the switch back into place. Turn the power back on and test the switch to ensure it is working properly.
Where is the fog light switch on a 99 mercury tracer?
Assuming it is the same as the 1998 Mercury Tracer : The fog light switch is on the turn signal lever , next to the head light switch * you probably need to have your head lights on low beam
What is the basic wiring diagram for a light switch?
The basic wiring diagram for a light switch involves connecting the power source to the switch, then connecting the switch to the light fixture. The power source is typically connected to one terminal of the switch, while the other terminal is connected to the light fixture. This allows the switch to control the flow of electricity to the light.
What is the difference between a line and load in a light switch circuit?
In a light switch circuit, the line is the wire that brings power into the switch, while the load is the wire that carries power from the switch to the light fixture. The line wire is typically connected to the power source, while the load wire is connected to the light fixture.
How do you take the head light dome light switch off on a 1993 Mercury Cougar?
You don't. The switch is all one , you will have to replace the entire switch.
