0
What else can I help you with?
A daguerreotype was an early photographic method created using a?
copper plate coated with silver iodide
Does copper have cleavage?
No. Cleavage is absent in copper and its fracture is jagged.
Why do you get heavy algae growth in your pool a day or two after using algaecide?
I just had a similar problem so I'll tell you what cleared mine up. I wasn't using enough Algaecide in my pool to correct the problem. I have about 32,000 gallons and the pool company recommended a quart and a half of an algaecide with 7% copper. I found mine at WalMart and it only had 3% copper, but it worked fine. Some of the products do not contain copper, they informed me, and copper is a necessary ingredient to kill the algae. Pour it in and let it sit overnight. Then vaccumm to WASTE the walls and bottom. The algae is so fine that it will remain in your filter and keep flowing back to your pool if you vac the pool in the normal way. The Copper ingredient bonds to the algae for removal. After the pool is clean, add a few ounces of the algaecide each week. I need to add about 6 oz. Let us know if this works for you.
What colors make copper?
Yellow, red and slight bit of blue make copper.
What is the number of subatomic particles for copper?
Copper has 29 electrons and protons; the number of neutrons is specific for each isotope. Number of neutrons in a copper isotope = Mass number - 29
Electrical earthing chemicals?
How earthing is made in dry soil and rocky area using copper spike.
What is the difference between chemical earthing and conventional earthing?
Chemical Earthing and Conventional Earthing are different types of earthing techniques. Conventional Earthing is based on plate earthing and pipe type earthing but Chemical Earthing on GI or Copper.
What is the best earthing for industrial building?
pipe earthing is the best in 6 feet and 3" pipe, Connecting copper rod thickness 12"
How do you measure earthing using multimeter?
only earthing can not be measure. Anyone can only measures the voltage and the current with respect to the earthing .Thus it is impossible to measure the earthing.
What is Conventional Earthing?
The conventional earth is the use of a copper rod and plate driven into the earth.In dry areas this may be not sufficient to make a good earth and chemical systems are available. Chemical earths use a more resistant material to copper in the form of a tube packed with chemicals.These earths are more for the use of lightning conduction rather than electrical safety earth.Very popular in India.
In case you do not have coal and salt for earthing how can you achieve good temporary earthing?
If coal and salt are unavailable for temporary earthing, you can use copper or aluminum rods driven into moist soil to create a grounding connection. Additionally, using a large metal plate or a series of interconnected metal stakes can help improve conductivity. Ensuring good contact with the ground and keeping the area damp can enhance the effectiveness of the earthing system. Always prioritize safety and compliance with electrical standards when implementing temporary earthing solutions.
What is the difference between pipe earthing and plate earthing?
Assuming your reference to "earthing" is grounding (Grounding Electrode Conductor), a pipe is, as it sounds, a pipe (i.e. water pipe). A plate would be, as it sounds, a square (or rectangular) copper plate which would be buried in the ground.
How do you know if you need a surge arrester?
1. If there is fluctuation in electricity and you are using manual stabilizer. 2. If there is improper earthing or earth leakage. 3. If you are using d,ble earthing.
What are the specifications of CPWD for Earthing Pit?
The Central Public Works Department (CPWD) specifies that earthing pits should be constructed using copper or galvanized iron electrodes, with a minimum depth of 2.5 meters for effective grounding. The pit must be filled with charcoal and salt to enhance conductivity and moisture retention. Additionally, the dimensions of the pit should allow for proper drainage, and it should be accessible for maintenance. Regular inspections and tests are recommended to ensure the integrity of the earthing system.
What are the types of electrical earthing with respect to Electrodes?
Electrical earthing is classified into many types as Neutral earthing Body earthing Pipe earthing Plate earthing Chemical earthing Ground Compound Earthing
What is earthing of Chrysler voyager?
Earthing?
What is the difference between earthing boss and earthing lug and where to use?
An earthing boss and earthing lug are parts of a grounding connection. An earthing boss is in a casting that allows for the drilling and tapping of hole. A earthing lug is used to bond a wire to the ground.
