Yes definitely!! Use a primer designed for ceramic tile, and regular latex paint. I've read you should seal it with polyurethane, but I haven't sealed my bathroom walls (2 coats of primer 3-4 coats latex) and they've been fine for 2 months
No, it will not adhere properly.
You can remove oil paint from ceramic floor tile by using paint thinner. Wet a soft cloth with paint thinner and rub it over the paint stain until it is removed.
To effectively remove paint from ceramic tile, you can use a commercial paint remover or a mixture of water and vinegar. Apply the solution to the painted area and let it sit for a few minutes before scrubbing with a brush or sponge. Rinse the tile thoroughly with water to remove any residue.
form_title= Ceramic Tile form_header= Install ceramic tile in your home! Where would you like the ceramic tile installed?*= _ [50] Do you need the ceramic tile to be custom cut?*= () Yes () No () Not Sure What type of tile do you what installed?*= _ [50]
You remove oil based paint on tile floors by using a strong detergent mixed with water and a soft cloth
If it is vinyl tile and it's latex paint, rubbing alcohol will remove it. If it is a ceramic or porcelain tile, you can carefully scrape it off or if it is also latex paint, the same thing,,,alcohol will remove it.
The name. Spartek tile is a brand of tile and Ceramic tile is a type of tile.
ceramic tile installation
Paint thinner will take off the oil based paint, but first test it in a corner to ensure it will not damage the face. Glazed tile shouldn't be damaged from paint thinner, but you would want to be sure.
It depends on the type of ceramic adhesive. Many of them can be taken off tile with lacquer thinner on a rag.
A wet tile saw is the best tool for cutting ceramic tile.
It depends on the paint that was used to paint the tiles originally, but usually a methylene chloride stripper will take off an epoxy used to paint tiles and not harm the tiles. Use strippers only in a well ventilated area with protective clothing and eyewear.